Font Selection; Font Selection By Prescribe Commands - Kyocera TASKalfa 3051ci Technical Reference Manual

Font Selection

Font Selection by PRESCRIBE Commands

Font Name
LetterGothicBM12-Italic
LetterGothicBM12-Bold
LetterGothicBM12-BoldItalic 51
LinePrinterBM8.5-Roman
Swiss721BM14.4-Bold
Swiss721BM14.4-BoldItalic
Swiss721BM12-Bold
Swiss721BM12-BoldItalic
Swiss721BM10-Bold
Swiss721BM10-BoldItalic
Swiss721BM8-Roman
Swiss721BM8-Italic
Swiss721BM8-Bold
Swiss721BM8-BoldItalic
Swiss721BM6-Roman
Swiss721BM6-Italic
Swiss721BM6-Bold
Swiss721BM6-BoldItalic
LinePrinterBM9-Roman
LinePrinterBM9-Italic
LinePrinterBM9-Bold
LinePrinterBM9-BoldItalic
LinePrinterBM7-Roman
LinePrinterBM7-Italic
LinePrinterBM7-Bold
LinePrinterBM7-BoldItalic
There are several ways to select the fonts: one way is to use the appropriate keys on the
printing system's control panel; a second way is to place a PRESCRIBE command in the
file to be printed, as in the examples in Chapter 1; a third way is to select a printing sys-
tem driver within a software application. This third way is preferable because the fonts
are integrated directly into the software. In the absence of this support, the user should
read the following information on choosing and placing PRESCRIBE commands.
The PRESCRIBE commands associated with font selection include:
• FSET (change current Font SETting by characteristic)
• SFNT (Select current FoNT by typeface)
• ALTF (select ALTernate Font) and SETF (SET alternate Font)
• SCF (Save Current Font) and RPF (Return to Previous Font)
• SCCS (Save Current Code Set) and RPCS (Return to Previous Code Set)
Font Number Height (Pts.) Pitch (cpi)
Port. Land.
50 27 12
9 28 12
79 12
88 — 8.5
10 29 14.4
52 — 14.4
11 30 12
53 — 12
12 31 10
54 — 10
13 32 8
55 — 8
56 74 8
57 — 8
14 33 6
58 — 6
59 75 6
60 — 6
15 34 9
61 35 9
62 76 9
63 77 9
16 36 7
64 — 7
65 78 7
66 — 7
Font Selection
12
12
12
16.67
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
Prop.
16.67
16.67
16.67
16.67
21.43
21.43
21.43
21.43
4-7