Kyocera TASKalfa 3051ci Technical Reference Manual page 106

Chapter 6 Permanent Parameters
6-6
Table 6.2. Interface-independent Parameters (Sheet 2 of 8)
Environment Parameter Value
Serial interface baud H1
rate
Serial interface data bits H2
Serial interface stop bits H3
Serial interface parity H4
Serial interface protocol H5
Buffer nearly-full H6
threshold
Buffer nearly-empty H7
threshold
Total host buffer size H8
Form feed time-out H9
value
Memory card partition I0
b
reading at power-up
Event log panel menu I1
Character width I2
Sleep timer I5
End-of-job I7
interpretation for option
interface OPT2
End-of-job I8
interpretation for print
server interface
Reduce/enlarge ratio J0
(Models supporting A3
size only)
c
Status send control M1
3: 300 bps (not valid for some models)
6: 600 bps (not valid for some models)
12: 1200 bps
24: 2400 bps
48: 4800 bps
96: 9600 bps
19: 19200 bps
38: 38400 bps
57: 57600 bps
11: 115200 bps
7 or 8
1 or 2
0: None
1: Odd
2: Even
3: Ignore
0: Combination of 1 and 3 below
1: DTR, positive true
2: DTR, negative true
3: XON/XOFF
4: ETX/ACK
5: XON/XOFF recognized only as protocol
Percentage of the received data buffer size.
Percentage of the received data buffer size.
0 to 99 in units of the size defined by FRPO S5 5 (monochrome
Value in units of 5 seconds (0 to 99).
Partition name on a memory card to be read
automatically at power-up. Maximum of 15
printable ASCII characters (20H through 7EH),
enclosed in single or double quotation marks.
0: Off
1: On
0: Normal
1: HP LaserJet compatible
0: Off
1: On
Interprets EOJ given by NIC to the following:
0: None
1: ^L (0CH)
2: ^D (04H)
3: ^L and ^D
7: ^D and ^L
Interprets EOJ issued by print server to the
following:
0: None
1: ^L (0CH)
2: ^D (04H)
3: ^L and ^D
7: ^D and ^L
0: 100%
5: 70%
6: 81%
7: 86%
8: 94%
9: 98%
0: Off
1: Send printer status.
Factory setting
96
8
1
0
0
90
70
model), 10
(monochrome model
with network
Interface), or 12 (color
model)
6
—
0
0
1
0
0
0
0