Solving Problems; Drive Problems; Cd And Dvd Drive Problems - Dell Precision M20 User Manual

Mobile workstation
Hide thumbs Also See for Precision M20:
Table of Contents

Advertisement

Back to Contents Page
  Solving Problems
Dell Precision™ Mobile Workstation M20 User's Guide
  Drive Problems
  E-Mail, Modem, and Internet Problems
  Error Messages
  IEEE 1394 Device Problems
  Keyboard Problems
  Lockups and Software Problems
  Memory Problems
  Network Problems
 
 Drive Problems
 
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
Fill out the
Diagnostics Checklist
as you complete these checks.
 
Ensure that Microsoft® Windows® recognizes the drive  —
the CD or DVD drive is not listed, perform a full scan with your antivirus software to check for and remove viruses. Viruses can sometimes
prevent Windows from recognizing the drive.
 
Test the drive  —
 
 Insert another floppy into the optional floppy drive or a CD or DVD into the optical drive to eliminate the possibility that the original
l
one is defective.
 Insert a bootable floppy into the optional floppy drive and restart the computer.
l
 
Clean the drive or disk  —
 See
"Cleaning Your
 
Ensure that the CD is snapped onto the spindle
 
Check the cable connections
 
Check for
hardware incompatibilities
 
Run the
Dell Diagnostics
 

CD and DVD drive problems

NOTE:
High-speed CD or DVD drive vibration is normal and may cause noise, which does not indicate a defect in the drive or the CD or DVD.
NOTE:
Because of different regions worldwide and different disc formats, not all DVD titles work in all DVD drives.
 
Problems writing to a CD/DVD-RW drive
 
Close other programs  —
 The CD/DVD-RW drive must receive a steady stream of data when writing. If the stream is interrupted, an error
occurs. Try closing all programs before you write to the CD/DVD-RW.
 
Turn off Standby mode in Windows before writing to a CD/DVD-RW disc  —
in the Windows Help and Support Center for information on
 
Change the write speed to a slower rate —
 
  PC Card Problems
  Power Problems
  Printer Problems
  Scanner Problems
  Sound and Speaker Problems
  Touch Pad or Mouse Problems
  Video and Display Problems
 Click the Start button and click My Computer. If the optional floppy drive or
Computer."
power management
See the help files for your CD or DVD creation software.
 See
"Power
Management" or search for the keyword standby
modes.

Advertisement

Table of Contents
loading

Table of Contents