a. Open the display all the way (180 degrees) so that it lies flat against your work surface.
b. Starting on the right side of the computer, use a plastic scribe to pry up the center control cover. Lift it away from the computer, and lay it aside.
1
center control cover
4. Remove the keyboard:
a. Remove the two M2.5 x 6-mm screws across the top of the keyboard.
NOTICE:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
NOTE:
Lift the keyboard carefully in
b. Rotate the keyboard up 90-degrees and slide it forward to gain access to the keyboard connector.
c. Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.
NOTE:
When you replace the keyboard, ensure that the keyboard tabs are completely in place to avoid scratching the palm rest.
Begin."
step b
to ensure that you do not pull on the keyboard wire.