Mobile Broadband Network (Wwan) Card - Dell Precision M2300 Service Manual

1 WLAN card 2
NOTICE: To avoid damaging the WLAN card, never place cables on top of or under the card.
5. To install a WLAN card:
a. Move any antenna cables out of the way to make space for the WLAN card.
b. Insert the WLAN card into the system board connector at a 45-degree angle, and press the card into the metal securing tabs until you feel a click.
1 WLAN card 2 system board connector
NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your WLAN card.
c. Connect the antenna cables to the WLAN card, ensuring that you route the cables correctly (see the cable routing diagram in
Display Assembly).
Mobile Broadband Network (WWAN) Card
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
NOTE: Mobile Broadband network cards may not be available in certain regions.
NOTE: An optional Flash Cache Module (FCM) card may be installed in the WWAN/FCM card connector.
If you ordered a Mobile Broadband network card with your computer, the card is already installed.
metal securing tabs (2)
3 antenna cable connectors
Removing the