Removing The Display Hinges - Dell Precision M2300 Service Manual
Dell precision m2300 service manual
Hide thumbs
Also See for Precision M2300:
- Quick reference manual (244 pages) ,
- User manual (160 pages) ,
- User manual (105 pages)
Table of Contents
Advertisement
1 top flex-cable
2 flex-cable release levers
connector
(2)
4 inverter board
5 bottom flex-cable
connector
Removing the Display Hinges
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Dell™ Product Information Guide.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface, such as a connector on the back of the computer.
1. Follow the instructions in
Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the M2.5 x 5-mm screw from the right display hinge.
1
M2.5 x 5-mm screw
4
alignment pin
6. Lift the right display hinge off the two alignment pins and out of the top cover.
7. Repeat
step 5
and
step 6
for the left display hinge.
Back to Contents Page
3 back of display panel
6 pull-tab on bottom flex-cable
connector
Begin.
Display
Assembly).
Removing the Display
Bezel).
Removing the Display
Panel).
2
display hinges (2)
(left and right)
3
top cover
Advertisement
Table of Contents
