Removing The Display Hinges - Dell Latitude D620 ATG Service Manual

6. Gently pull the pull-tab on the bottom flex-cable connector to release the cable from the inverter board.
7. Squeeze the flex-cable release levers at either side of the top flex-cable connector, releasing the connector.
1 top flex-cable 2 flex-cable release levers (2)
connector
4 inverter board 5 pull-tab on bottom flex-cable
connector
Removing the Display Hinges
CAUTION: Before working inside your computer, follow the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display Panel (see
5. Remove the M2.5 x 5-mm screw from the right display hinge.
6. Lift the right display hinge off the two alignment pins and out of the display back cover.
7. Repeat step 5 and step 6 for the left display hinge.
1 M2.5 x 5-mm screw 2
4 alignment pin
Back to Contents Page
3 back of display
Begin.
Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
display hinges (2) 3 display back cover
(left and right)
panel