12 Remove the camera module.
1
tape
3
camera module
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the connector on the camera module.
3 Adhere the tape that secures the camera cable to the camera module.
4 Align the slots on the camera module with the alignment posts on the
display cover.
5 Replace the display bezel (see "Replacing the Display Bezel" on page 58).
6 Replace the display assembly (see "Replacing the Display Assembly" on
page 56).
66
Camera Module
1
2
camera cable
4
plastic scribe
2
4
3