CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display Cable
Removing the Display Cable
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 53).
3 Remove the display bezel (see "Removing the Display Bezel" on page 57).
4 Remove the display panel (see "Removing the Display Panel" on page 58).
5 Turn the display panel over and place it on a clean surface.
6 Lift the tape that secures the display cable to the connector on the display
panel and disconnect the display cable.
1
tape
2
60
Display
Before turning on the computer, replace all screws and ensure that no
display cable
2
1