Hinge Caps; Removing The Hinge Caps - Dell Inspiron 14 N4120 Service Manual

Replacing the Display Cable
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the display cable to the connector on the display panel and secure
it with the tape.
3 Turn the display panel over and place it on the display cover.
4 Replace the display panel (see "Replacing the Display Panel" on page 59).
5 Replace the display bezel (see "Replacing the Display Bezel" on page 58).
6 Replace the display assembly (see "Replacing the Display Assembly" on
page 56).
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.

Hinge Caps

Removing the Hinge Caps

1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the display assembly (see "Removing the Display Assembly" on
page 53).
3 Remove the display bezel (see "Removing the Display Bezel" on page 57).
4 Remove the six screws that secure the display panel to the display cover.
5 Turn the display panel over and keep it on a clean surface.
6 Press both sides of each hinge cap and lift the hinge caps out of the display
hinges.
61
Display