1
captive screw
3
tabs (2)
Replacing the Module Cover
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the tabs on the module cover with the slots on the computer base
and gently snap the cover in place.
3 Tighten the captive screw that secures the module cover to the computer
base.
4 Replace the battery (see "Replacing the Battery" on page 16).
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
18
Module Cover
1
2
module cover
Before turning on the computer, replace all screws and ensure that no
2
3