Entering The Service Tag In The Bios - Dell Inspiron 14 N4120 Service Manual

Service manual
Hide thumbs Also See for Inspiron 14 N4120:
Table of Contents

Advertisement

20 Replace any cards or blanks removed from the 8-in-1 media card reader.
CAUTION:
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
21 Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag
in the BIOS of the replacement system board.
22 Enter the service tag (see "Entering the Service Tag in the BIOS" on
page 82).

Entering the Service Tag in the BIOS

1 Ensure that the AC adapter is plugged in and that the main battery is
installed properly.
2 Turn on the computer.
3 Press <F2> as soon as you see the Dell logo to enter the system setup
program.
4 Navigate to the security tab and enter the service tag in the Set Service Tag
field.
82
System Board
Before turning on the computer, replace all screws and ensure that no

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Inspiron 14rInspiron n4110Inspiron n4120

Table of Contents