Nic Indicator Codes - Dell PowerVault DX6112 Owner's Manual

Item Indicator, Button, or
Connector
2 System identification
connector
3 iDRAC7 Enterprise port
4 PCIe expansion card slots
low–profile (3)
5 Serial connector
6 Video connector
7 USB connectors (2)
8 Ethernet connectors
9 PCIe expansion card slots
full height (3)
10 Power supplies (2)
11 Hard drives (2) (back)
12 vFlash media card slot

NIC Indicator Codes

Figure 4. NIC Indicator
1. link indicator
2. activity indicator
Icon Description
To reset iDRAC (if not disabled in F2 iDRAC setup) press
and hold the button for more than 15 seconds.
Connects the optional system status indicator assembly
through the optional cable management arm.
Dedicated management port.
NOTE: The port is available for use only if the iDRAC7
Enterprise license is installed on your system.
Allows you to connect up to three PCI Express expansion
cards.
Allows you to connect a serial device to the system.
Allows you to connect a VGA display to the system.
Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.
Four integrated 10/100/1000 Mbps NIC connectors
or
Four integrated connectors that include:
• Two 10/100/1000 Mbps NIC connectors
• Two 100 Mbps/1 Gbps/10 Gbps SFP+/10 GbE T
connectors
Allows you to connect up to three full-height PCI Express
expansion cards.
AC 750 W
Up to two hot-swappable 2.5 inch hard drives.
Allows you to insert a vFlash media card.
13