Diagnostic Indicators - Dell PowerVault DX6112 Owner's Manual

Item Indicator, Button, or
Connector
5 Hard drives
6 Video connector
7 USB connector
8 Information tag

Diagnostic Indicators

The diagnostic indicators on the system front panel display error status during system startup.
NOTE: No diagnostic indicators are lit when the system is switched off. To start the system, plug it into a working
power source and press the power button.
The following section describes system conditions and possible corrective actions associated with these indicators:
Health indicator
Condition
If the system is on,
and in good health,
the indicator lights
solid blue.
The indicator blinks
amber if the system
is on or in standby,
and any error exists
(for example, a failed
fan or hard drive)
Hard-drive indicator
Condition
The indicator blinks
amber if a hard drive
experiences an
error.
10
Icon Description
Use this button only if directed to do so by qualified
support personnel or by the operating system's
documentation.
Up to twelve 3.5 inch hot-swappable hard drives.
Allows you to connect a VGA display to the system.
Allows you to connect USB devices to the system. The
port is USB 2.0-compliant.
A slide-out label panel which allows you to record system
information such as Service Tag, NIC, MAC address, and
so on as per your need.
Corrective Action
None required.
See the System Event Log or system messages for the specific issue.
Invalid memory configurations can cause the system to halt at
startup without any video output. See
Corrective Action
See the System Event Log to determine the hard drive that has an
error. Run the appropriate Online Diagnostics test. Restart system
and run embedded diagnostics (ePSA). If the hard drives are
configured in a RAID array, restart the system and enter the host
adapter configuration utility program.
Getting Help.