Memory Settings Screen; Processor Settings Screen - Dell PowerVault DX6112 Owner's Manual

Owner's manual
Hide thumbs Also See for PowerVault DX6112:
Table of Contents

Advertisement

Menu Item
Description
System Manufacturer Displays the name of system manufacturer.
System Manufacturer
Displays the contact information of the system manufacturer.
Contact Information

Memory Settings Screen

Menu Item
Description
System Memory Size
Displays the amount of memory installed in the system.
System Memory Type Displays the type of memory installed in the system.
System Memory
Displays the system memory speed.
Speed
System Memory
Displays the system memory voltage.
Voltage
Video Memory
Displays the amount of video memory.
System Memory
Specifies whether system memory tests are run during system boot. Options are Enabled and
Testing
Disabled. By default, the System Memory Testing option is set to Disabled.
Memory Operating
Specifies the memory operating mode. The options available depending on the memory
Mode
configuration of your system are Optimizer Mode, Advanced ECC Mode, Mirror Mode, Spare
Mode, and Spare with Advanced ECC Mode. By default, the Memory Operating Mode option is
set to Optimizer Mode.
Node Interleaving
If this field is Enabled, memory interleaving is supported if a symmetric memory configuration is
installed. If Disabled, the system supports Non-Uniform Memory architecture (NUMA)
(asymmetric) memory configurations. By default, Node Interleaving option is set to Disabled.
Serial Debug Output
By default, it is set to disabled.

Processor Settings Screen

Menu Item
Description
Logical Processor
Allows you to enable or disable logical processors and display the number of logical
processors. If the Logical Processor option is set to Enabled, the BIOS displays all the logical
processors. If this option is set to Disabled, the BIOS only displays one logical processor per
core. By default, the Logical Processor option is set to Disabled.
QPI Speed
Allows you to set the QuickPath Interconnect data rate settings. By default, the QPI Speed
option is set to Maximum data rate.
20
NOTE: The Memory Operating Mode can have different defaults and available options
based on the memory configuration.
NOTE: The QPI speed option displays only when both the processors are installed.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx6112-sn

Table of Contents