Brother MFC-J4410DW Basic User's Manual page 68

Chapter 6
Changing the remote codes
The preset Fax Receive Code is l 5 1. The
preset Telephone Answer Code is # 5 1. If
you want to, you can replace them with your
own codes.
a
Press (Settings).
b
Press s or t on the Touchpanel to
display Fax.
c
Press Fax.
d
Press s or t to display
Setup Receive.
e
Press Setup Receive.
f
Press s or t to display
Remote Codes.
g
Press Remote Codes.
h
Press On.
i
Do one of the following.
 If you want to change the Fax
Receive Code, enter the new code.
Press OK. Go to step j.
 If you do not want to change the Fax
Receive Code, press OK. Go to
step j.
j
Do one of the following.
 If you want to change the Telephone
Answer Code, enter the new code.
Press OK. Go to step k.
If you do not want to change the

Telephone Answer Code, press OK.
Go to step k.
k
Press .
54
NOTE
6
• If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code (such as # # # and 9 9 9).
• Remote Codes might not work with some
telephone systems.