Brother MFC-J4410DW Basic User's Manual page 102

Error Message
(MFC-J4410DW)
No Paper Fed
(MFC-J4610DW)
No Paper Fed
No Paper Fed #1
No Paper Fed #2
No Response/Busy
Not Registered
Out of Fax Memory
88
Cause
The machine is out of paper or the
paper is not correctly loaded in the
paper tray.
The paper is jammed in the machine.
Paper dust has accumulated on the
surface of the paper pick-up rollers.
The Jam Clear Cover is not closed
correctly.
The paper was not inserted in the
center position of the manual feed slot.
The number you dialed does not
answer or is busy.
You tried to access a Speed Dial
number that has not been stored in the
machine.
The fax memory is full.
Action
Do one of the following:
 Refill the paper in the paper tray,
and then press OK on the
Touchscreen.
 Remove the paper and load it
again, and then press OK on the
Touchscreen. (See Loading paper
and other print media on page 13.)
Remove the jammed paper by
following the steps in Printer jam or
paper jam on page 95.
If this error occurs often during 2-sided
copying or 2-sided printing, the paper
feed rollers may be stained with ink.
Clean the paper feed rollers.
(See Advanced User's Guide:
Cleaning the paper feed rollers.)
Clean the paper pick-up rollers.
(See Advanced User's Guide:
Cleaning the paper pick-up rollers.)
Make sure the Jam Clear Cover is
closed evenly at both ends. (See
Printer jam or paper jam on page 95.)
Remove the paper and re-insert it in
the center of the manual feed slot, and
then press OK on the Touchscreen.
(See Loading paper in the manual
feed slot on page 22.)
Verify the number and try again.
Set up the Speed Dial number. (See
Storing Speed Dial numbers
on page 56.)
Do one of the following:
 Clear the data in the memory. To
gain extra memory, you can turn
off Memory Receive.
(See Advanced User's Guide:
Turning off Memory Receive
operations.)
 Print the faxes that are in the
memory. (See Advanced User's
Guide: Printing a fax from the
memory.)