Brother MFC-J4410DW Basic User's Manual page 104

Error Message
Paper tray not
detected. Please
put the paper tray
firmly back in the
machine.
Screen init. Fail
Unable to CleanXX
Unable to Init.XX
Unable to PrintXX
Unable to ScanXX
Unusable Device
Disconnect device
from front connector
& turn machine off &
then on
Unusable Device
Please Disconnect
USB Device.
Wrong Ink Color
90
Cause
The paper tray is not completely
inserted.
Paper or a foreign object has
prevented the paper tray from being
inserted correctly.
The Touchscreen was pressed before
the power-on initialization was
completed.
Debris may be stuck between the
lower part of the Touchscreen and its
frame.
The machine has a mechanical
problem.
—OR—
A foreign object such as a paper clip or
a piece of ripped paper is in the
machine.
A broken device has been connected
to the USB direct interface.
A USB device or USB Flash memory
drive that is not supported has been
connected to the USB direct interface.
For more information, visit us at
http://solutions.brother.com/.
An ink cartridge has been installed in
the wrong position.
Action
Slowly push the paper tray completely
into the machine.
Pull the paper tray out of the machine,
and remove the jammed paper or
foreign object. Slowly push the paper
tray completely into the machine.
Make sure that nothing is touching or
resting on the Touchscreen.
Insert a piece of stiff paper between
the lower part of the Touchscreen and
its frame and slide it back and forth to
push out the debris.
Open the scanner cover and remove
any foreign objects and paper scraps
from inside the machine. If the error
message continues, disconnect the
machine from the power for several
minutes and reconnect it.
(The machine can be turned off for
approximately 24 hours without losing
faxes stored in the memory. See
Transferring your faxes or Fax Journal
report on page 92.)
Unplug the device from the USB direct
interface, then press
machine off and then on again.
Unplug the device from the USB direct
interface. Turn the machine off and
then on again.
Identify which ink cartridges are not in
their color-coded positions and move
them to their correct positions.
to turn the