Emergency Optical Drive Tray Release; Playing Media On The Optical Drive; Using The Optical Player Software; Using The Drive On Battery Power - Fujitsu LifeBook N6460 User Manual

Fujitsu notebook user's guide
Hide thumbs Also See for LifeBook N6460:
Table of Contents

Advertisement

L i f e B o o k N 6 4 0 0 S e r i e s U s e r ' s G u i d e
a.

EMERGENCY OPTICAL DRIVE TRAY RELEASE

If for some reason the eject button fails, you can open
the media tray with a paper clip inserted into the eject
hole in the far right side of the front of the tray.
Straighten one side of a paper clip and push it gently into
the hole. The tray will pop out a short distance.
Figure 4-7. Emergency Removal of a CD/DVD

PLAYING MEDIA ON THE OPTICAL DRIVE

There are three ways to operate the optical drive:

Using the Optical Player Software

Using the Media Player Buttons
Using the Desktop Control Panel
USING THE OPTICAL PLAYER SOFTWARE
Prior to using your optical drive, you must
install the optical player software. For
details on using your optical player
software, refer to the software Help file.
Starting a DVD Movie
1. Insert the DVD into the notebook's optical drive. If
the CD AutoRun feature activates, skip Step 2.
2. The first time you insert a movie into the DVD/CD-
RW tray, you will be prompted to select what you
want the system to do when discs are inserted (e.g.,
start automatically or wait for a prompt). Until you
make a selection, you will receive the same prompt
whenever you insert a disc.
3. Click OK to close the About DVD Player Perfor-
mance dialog box and the movie will begin. After
you make your selections, the PowerDVD control
panel will appear whenever you insert a disc.
40
b.
Figure 4-6. Loading Media
Opening the DVD/CD-RW Drive Control Panel
With most DVD-ROMs, you have the option of altering
how the movie should play and what you wish to view.
You can do this by using the DVD/CD-RW Combo
Drive control panel and the mouse.
To open a dropdown menu for options, right-click on
the movie screen.
Using the Optical Drive Control Panel
The PowerDVD optical drive software allows you to
watch the movie much like a VCR player. You have the
option to pause, rewind, fast-forward and stop the
movie at any point.
1. To Pause the movie, click the
2. To Rewind the movie, click the
to a specific portion of the movie, or the
to return to the opening screen.
3. To Fast-forward the movie, click the
forward to a specific portion of the movie, or the
button to jump to the ending credits.
4. To Stop the movie, click the
Exiting the Optical Player
1. Click the

USING THE DRIVE ON BATTERY POWER

Since optical drives consume a lot of power, your overall
battery life will be shorter when operating the optical
drive continuously (such as watching a DVD movie).
Many movie run-times are longer than your LifeBook
notebook can support on a single battery. If you are
watching a DVD movie on battery power you may need
to swap in an additional, charged battery or attach AC
power during the movie to view it in its entirety.
c.
button.
button to rewind
button.
in the upper right corner of the title bar.
d.
button
button to

Advertisement

Table of Contents
loading

Table of Contents