1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. Lifebook N6470
  6. User manual

Fujitsu LifeBook N6470 User Manual

Fujitsu computer systems corporation notebook user's guide
Hide thumbs Also See for LifeBook N6470:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Guide
Learn how to use
your Fujitsu LifeBook
N6470 notebook

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LifeBook N6470

Summary of Contents for Fujitsu LifeBook N6470

  • Page 1 User’s Guide Learn how to use your Fujitsu LifeBook N6470 notebook...
  • Page 2 Copyright and Trademark Information Fujitsu Computer Systems Corporation has made every effort to ensure the accuracy and completeness of this document; however, as ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the accuracy of the contents of this document.
  • Page 3 FCC Part 15 Fujitsu Computer Systems Corporation 1250 E. Arques Avenue, M/S 122 Sunnyvale, CA 94085 (408) 746-6000 Base Model Configuration: LifeBook N6470 notebook Complies with Part 15 of the FCC Rules. A CHEMICAL KNOWN TO THE B5FJ-6361-01EN-00...
  • Page 4 This product requires an AC adapter to operate. Use only a UL Listed I.T.E. AC Adapter with an output rating of 19V DC, with a current of 5.27A (100W).. AC adapter output polarity: When using your notebook equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: •...

  • Page 5: Recycling Your Battery

    System Disposal INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL Recycling your battery Over time, the batteries that run your mobile computer will begin to hold a charge for a shorter amount of time; this is a natural occurrence for all batteries.

  • Page 6: Table Of Contents

    Contents Preface About This Guide ..........7 Conventions Used in the Guide .
  • Page 7 Clicking........... . 29 Double-Clicking .
  • Page 8 Power On ..........42 Boot Sequence .
  • Page 9 Installing PC Cards ......... . . 63 Removing PC Cards .
  • Page 10 Re-installing Individual Drivers and Applications ....99 Restoring the Operating System for Windows XP Systems... . 100 Restoring the Operating System for Windows Vista Systems .
  • Page 11 Glossary ........... . . 125 Regulatory Information .

  • Page 12: Preface

    Preface About This Guide The LifeBook® N6470 notebook from Fujitsu Computer Systems Corporation provides desktop performance with a fast Intel® Core™ 2 Duo processor. The 17" Color Enhanced Crystal View WXGA+ high-resolution screen displays vibrant colors with pinpoint sharpness. The LifeBook features an ATI Mobility™...

  • Page 13: Fujitsu Contact Information

    HE INFORMATION ICON HIGHLIGHTS INFORMATION THAT WILL ENHANCE YOUR UNDERSTANDING OF THE SUBJECT MATERIAL HE CAUTION ICON HIGHLIGHTS INFORMATION THAT IS IMPORTANT TO THE SAFE OPERATION OF YOUR COMPUTER OR TO THE INTEGRITY OF YOUR FILES CAREFULLY HE WARNING ICON HIGHLIGHTS INFORMATION THAT CAN BE HAZARDOUS TO EITHER YOU OOK NOTEBOOK Fujitsu Contact Information Service and Support...
  • Page 14 • Conditions under which the problem occurred • Any error messages that have occurred • Type of device connected, if any Fujitsu Shopping Online You can go directly to the online by going to the website at: www.shopfujitsu.com. OU MUST HAVE AN ACTIVE INTERNET CONNECTION TO USE THE ONLINE To ensure that you always have the most current driver updates related to your system, you should occasionally access the Fujitsu Driver Update (FDU) utility.

  • Page 15: Getting To Know Your Lifebook

    Getting to Know Your LifeBook Overview This section describes the components of your Fujitsu LifeBook N6470 notebook. We strongly recommend that you read it before using your notebook – even if you are already familiar with notebook computers. Figure 1. Fujitsu LifeBook N6470 notebook...

  • Page 16: Locating The Controls And Connectors

    Locating the Controls and Connectors Fingerprint Recognition/ Scrolling Sensor Touchpad Pointing Device Stereo Speakers Keyboard Visual Optimizer Mode Volume Internet Figure 2. LifeBook notebook with display open 11 - Locating the Controls and Connectors Display Panel Latch Display Panel Status Indicator Panel Visual Optimizer Button Application/Media Player Buttons...

  • Page 17: Top And Front Components

    Top and Front Components The following is a brief description of your LifeBook notebook’s top and front components. Display Panel Latch The display panel latch locks and releases the display panel. Display Panel The display panel is a color LCD panel with back lighting for the display of text and graphics. Status Indicator Panel The Status Indicator Panel displays symbols that correspond with a specific component of your LifeBook notebook.
  • Page 18 Volume Control The Volume Control toggle allows you to increase or decrease volume manually. See “Controlling the Volume” on page 32. Wireless LAN Switch The Wireless LAN On/Off Switch turns the wireless LAN on and off. See “Appendix A: WLAN User’s Guide”...

  • Page 19: Left-Side Panel Components

    Figure 3. LifeBook notebook left-side panel Left-Side Panel Components Following is a brief description of your LifeBook notebook’s left-side components. Optical Drive One of several different drives can be installed depending upon the configuration of your system. See “Optical Drive” on page 57.. Optical Drive Eject Button The optical drive eject button is used to eject the media tray.

  • Page 20: Right-Side Panel Components

    Memory Stick/SD/xD Card Slot ExpressCard Eject Button PC Card Eject Button Figure 4. LifeBook notebook right-side panel Right-Side Panel Components The following is a brief description of your LifeBook notebook’s right-side components. Memory Stick/SD/xD Card Slot The Memory Stick/Secure Digital (SD)/xD card slot allows you to insert a flash memory card for data storage.
  • Page 21 Microphone Jack The microphone jack allows you to connect an external stereo microphone. See “Microphone Jack” on page 78. USB 2.0 Ports The five USB ports (one on the right side panel and four on the rear panel) allow you to connect Universal Serial Bus (USB) 2.0 or USB 1.1 devices.

  • Page 22: Back Panel Components

    Figure 5. LifeBook notebook back panel Back Panel Components Following is a brief description of your LifeBook notebook’s back panel components. LAN Port The LAN port is designed to accept a Local Area Network (LAN) RJ-45 jack. See “Communications Ports” on page 74. USB 2.0 Ports The five USB ports (one on the right side panel and four on the rear panel) allow you to connect Universal Serial Bus (USB) 2.0 or USB 1.1 devices.
  • Page 23 Anti-theft Lock Slot The anti-theft lock slot allows you to attach an optional physical lock down device. Modem Port The modem port is designed to accept a Modem (RJ-11) telephone jack for the multi-national internal 56K modem. See “Communications Ports” on page 74. HE INTERNAL MODEM IS NOT INTENDED FOR USE WITH MODEM TO A DIGITAL OOK NOTEBOOK...
  • Page 24 Air Flow Vents The air flow vents assist in proper cooling of the system. O PROTECT YOUR NOTEBOOK FROM DAMAGE AND TO OPTIMIZE SYSTEM PERFORMANCE KEEP ALL AIR ALL VENTS UNOBSTRUCTED PERIODIC CLEANING O NOT OPERATE THE NOTEBOOK IN AREAS WHERE THE AIR VENTS CAN BE OBSTRUCTED TIGHT ENCLOSURES OR ON SOFT SURFACES LIKE A BED OR CUSHION S-Video Out Port The S-Video out port is used to transmit a high resolution video signal to a compatible TV or VCR.

  • Page 25: Bottom Components

    Figure 6. LifeBook notebook bottom panel Bottom Components The following is a brief description of your LifeBook notebook’s bottom panel components. Lithium ion Battery Bay The battery bay contains the internal Lithium ion battery. It can be opened for the removal of the battery when stored over a long period of time or for swapping a discharged battery with a charged Lithium ion battery.
  • Page 26 Memory Compartment Cover Your LifeBook notebook comes with high speed DDR2-667 PC5300 SO-DIMM memory. The memory upgrade compartment allows you to expand the system memory capacity of your LifeBook notebook, thus improving overall performance. See “Memory Upgrade Module” on page 70. Subwoofer The subwoofer speaker provides bass-range sound to supplement the stereo speakers, resulting in high- quality audio.

  • Page 27: Status Indicator Panel

    Battery Charging Status Indicator Panel The Status Indicator panel is located at the top of the keyboard, near the Visual Optimizer button. Within this panel are symbols that correspond to specific components of your notebook. These symbols tell you how each of those components is operating. The Battery Charging indicator displays whether or not the Lithium ion battery is currently being charged.

  • Page 28: Hard Drive/Optical Drive Access Indicator

    LED Condition Orange, blinking Battery Status Indicator This indicator shows how much charge is available within the installed battery. LCD Condition Green, solid Orange, solid Red, solid Red, blinking Hard Drive/Optical Drive Access Indicator The Hard Drive/Optical Drive Access indicator states whether your internal hard drive or optical drive are being accessed.
  • Page 29 CapsLock Indicator The CapsLock indicator states that your keyboard is set to type in all capital letters. ScrLk Indicator The ScrLk indicator states that your scroll lock is active. 24 - Status Indicator Panel...

  • Page 30: Keyboard

    Keyboard Fn Key Start Key Using the Keyboard Your Fujitsu LifeBook notebook has an integrated 103-key keyboard. The keys perform all the standard functions of a keyboard, including the Windows keys and other special function keys. This section describes the following keys. •...
  • Page 31 keys for moving the cursor or insertion point to the right, left, up, or down within windows, applications and documents. • Function keys: The keys labeled [F1] through [F12] are used in conjunction with the [Fn] key to produce special actions that vary depending on what program is running. •...
  • Page 32 Function Keys Your LifeBook notebook has 12 function keys, F1 through F12. The functions assigned to these keys differ for each application. You should refer to your software documentation to find out how these keys are used. Icon Keys [Fn+F3] Pressing [F3] while holding [Fn] will toggle the Audio Mute on and off.

  • Page 33: Touchpad Pointing Device

    Touchpad Pointing Device Cursor Control Left Button Fingerprint Recognition/ Scroll Sensor The Touchpad pointing device is built into your notebook. It is used to control the movement of the pointer to select items on your display panel. The Touchpad is composed of a cursor control, a left and right button, and an scroll sensor (which also acts as a fingerprint recognition sensor).

  • Page 34: Clicking

    N EXTERNAL MOUSE CAN BE CONNECTED TO THE USED SIMULTANEOUSLY WITH THE EXTERNAL MOUSE CONNECTED SPECIFICATIONS IN YOUR Clicking Clicking means pushing and releasing a button. To left-click, move the cursor to the item you wish to select, press the left button once, and then immediately release it.

  • Page 35: Double-Clicking

    Double-Clicking Double-clicking means pushing and releasing the left button twice in rapid succession. This procedure does not function with the right button. To double-click, move the cursor to the item you wish to select, press the left button twice, then immediately release it.

  • Page 36: Scrolling

    Using the scrolling sensor allows you to navigate through a document quickly without using the window’s scroll bars. This is particularly useful when you are navigating through online pages. To use the scrolling sensor, move your finger forward or backward across the button to scroll up or down a page.

  • Page 37: Volume Control

    Volume Control Your Fujitsu LifeBook notebook has multiple volume controls which interact with each other. NY SOFTWARE THAT CONTAINS AUDIO FILES WILL ALSO CONTAIN A VOLUME CONTROL OF ITS OWN YOU INSTALL AN EXTERNAL AUDIO DEVICE THAT HAS AN INDEPENDENT VOLUME CONTROL HARDWARE VOLUME CONTROL AND THE SOFTWARE VOLUME CONTROL WILL INTERACT WITH EACH OTHER THE EXTERNAL VOLUME CONTROL SETTING...

  • Page 38: Lifebook Application/Media Player Panel

    Figure 15. LifeBook Application/Media Player Panel Buttons LifeBook Application/Media Player Panel A unique feature of your LifeBook notebook is the LifeBook Application/Media Player Panel. This feature makes your LifeBook notebook more than just another notebook computer. The panel allows you to operate the optical drive as an independent audio media player or to launch applications with the touch of one button.

  • Page 39: Mode Button

    Mode Button Located at the left of the large LifeBook Application/Media Player button (Figure 15), this button allows you to select the function of the panel—either as an Application Launcher or a media player. When Application Launcher is selected, the mode indicator will light up. (Figure 16) When Media Player is selected, the media player indicators will light up.

  • Page 40: Configuring Your Application Panel

    When you start your system, the LifeBook Application Panel is automatically activated. As an application launcher, the LifeBook Application Panel is very flexible, giving you a variety of options. To set up the panel to best suit your needs, we have provided the Application Panel Setup utility that quickly and easily helps you make the most of this valuable feature.

  • Page 41: Using The Visual Optimizer

    Press this button to start playing a CD or DVD starting at the beginning. While the disc is playing, press it to pause. Press it again to continue • If you press the play button and nothing happens, there is no disc in the media player drive, you have other than a media disc in the drive, or system is not powered on.

  • Page 42: Getting Started With Your Lifebook

    Chapter 2 Getting Started with Your LifeBook DC Power Jack DC Output Cable AC Adapter AC Cable Figure 18. Connecting the AC Adapter Power Sources Your Fujitsu LifeBook notebook has three possible power sources: a primary Lithium ion battery, an AC adapter, or an optional Auto/Airline adapter.

  • Page 43: Connecting The Power Adapters

    The AC adapter or optional Auto/Airline adapter provides power for operating your notebook and charging the batteries. Connecting the AC Adapter Plug the DC output cable into the DC power jack of your LifeBook notebook. Plug the AC adapter into an AC electrical outlet. Connecting the Optional Auto/Airline Adapter Plug the DC output cable into the DC power jack on your notebook.

  • Page 44: Display Panel

    Display Latch Button Display Panel Your Fujitsu LifeBook notebook contains a display panel that is backlit for easier viewing in bright environments and maintains top resolution through the use of active-matrix technology. Opening the Display Panel Press the Display Panel latch button in. This releases the locking mechanism, allowing you to raise the display. Lift the display backwards, being careful not to touch the screen, until it is at a comfortable viewing angle.

  • Page 45: Adjusting Display Panel Brightness

    Once you have turned on your LifeBook notebook, you may want to adjust the brightness level of the screen to a more comfortable viewing level. There are three ways to adjust the brightness, by using the keyboard, the Power Options, or the Windows Mobility Center. Using the Keyboard Adjusting the brightness using the keyboard changes the setting only temporarily.

  • Page 46: Closing The Display Panel

    • HEN USING BATTERY POWER YOUR BRIGHTNESS SETTING IS SET TO APPROXIMATELY MID • HE HIGHER THE BRIGHTNESS LEVEL YOUR BATTERIES WILL DISCHARGE AS LOW AS POSSIBLE Closing the Display Panel Holding the edge of your display panel, pull it forward until it is flush with the body of your LifeBook notebook. Push down until you hear a click.

  • Page 47: Starting Your Lifebook Notebook

    Starting Your LifeBook Notebook Power On Power/Suspend/Resume Button The Power and Suspend/Resume button is used to power on your LifeBook notebook, to resume from Sleep or Save-to-Disk mode or to place your notebook in Sleep or Save-to-Disk mode. (You can also use the button to power down the system by holding it down for approximately five seconds.

  • Page 48: Boot Sequence

    O NOT CARRY THE NOTEBOOK AROUND WITH POWER ON OR SUBJECT IT TO VIBRATION OR SHOCKS DOING SO COULD DAMAGE THE NOTEBOOK When you Power On your notebook, it will perform a Power On Self Test (POST) to check the internal parts and configuration for correct functionality.

  • Page 49: Hard Disk Drive Passwords

    • You turn on the power to your LifeBook notebook. • You restart your LifeBook notebook from the Windows Shut Down dialog box. • The software initiates a system restart; for example, when you install a new application. Hard Disk Drive Passwords To provide additional security for your data, you can assign passwords to your hard disk drive(s).
  • Page 50 • BIOS Setup • Diagnostic Screen • Boot Menu • Patent Information • System Information • Continue Booting Click BIOS Setup to open the BIOS Setup Utility. The Boot Menu can also be invoked by pressing the [F12] key when the Fujitsu logo appears on the screen.

  • Page 51: Booting The System

    We strongly recommend that you not attach any external devices or put a DVD/CD in your drive until you have gone through the initial power on sequence. When you turn on your LifeBook notebook for the first time, it will display a Fujitsu logo on the screen. If you do nothing the system will load the operating system, and then the Windows Welcome will begin.

  • Page 52: Registering Windows Vista With Microsoft

    On the next screen set your time and date settings. You will next see the "Select your computer's current location" screen. Make your selection from Home, Work (Default), and Public location. The "Thank you" screen follows and an offer for free Norton Internet Security is extended. Following are several screens while Windows checks the system performance.

  • Page 53: Fujitsu Driver Update Utility

    HERE MAY BE ADDITIONAL THIRD UTILITY OR MORE INFORMATION Fujitsu Driver Update Utility Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. For more information about the FDU utility, refer to “Automatically Downloading Driver Updates”...

  • Page 54: Power Management

    Power Management Your LifeBook notebook has many options and features for conserving battery power. Some of these features are automatic and need no user intervention, such as those for the internal modem. However, others depend on the parameters you set to best suit your operating conditions, such as those for the display brightness.
  • Page 55 • Pressing the Power/Suspend/Resume button when your system is turned on. • Clicking the power icon on the lock menu. • Selecting Sleep from the Windows Shut Down menu. • Timing out from lack of activity. • Allowing the battery to reach the Dead Battery Warning condition. Your LifeBook notebook’s system memory typically stores the files on which you are working, open application information, and any other data required to support the operations in progress.

  • Page 56: Hibernation (Save-To-Disk) Feature

    The Hibernation feature saves the contents of your notebook’s system memory to the hard drive as a part of the Suspend/Resume mode. You can enable or disable this feature. Enable or Disable the Hibernation Feature The default settings are not enabled. To enable or disable the Hibernation feature follow these steps: From the Start menu, select Control Panel (Classic View), then select Power Options.

  • Page 57: Power Off

    Before turning off the power, check that the hard drive/optical drive access indicator is off. If you turn off the power while accessing a disk there is a risk of data loss. To ensure that your notebook shuts down without error, use the Windows shut down procedure. •...

  • Page 58: User-Installable Features

    Chapter 3 User-Installable Features Lithium ion Battery Your LifeBook notebook has a Lithium ion battery that provides power for operating your notebook when no external power source is available. The rechargeable battery is durable and long lasting, but should not be exposed to extreme temperatures, high voltages, chemicals, or other hazards.

  • Page 59: Recharging The Batteries

    • O NOT LEAVE A FAULTY BATTERY IN YOUR NOTEBOOK ITSELF INTO THE BAD BATTERY • NDER FEDERAL STATE TRASH LEASE TAKE CARE OF OUR ENVIRONMENT AND DISPOSE OF BATTERIES PROPERLY LOCAL GOVERNMENT AUTHORITY FOR DETAILS REGARDING RECYCLING OR DISPOSING OF OLD BATTERIES CANNOT FIND THIS INFORMATION ELSEWHERE (1-800-838-5487).
  • Page 60 SING HEAVY CURRENT DEVICES SUCH AS THE MODEM OR FREQUENT ACCESSES MAY PREVENT CHARGING COMPLETELY Low Battery State When the battery is running low, a low battery notification message will appear. If you do not respond to the low battery message, the batteries will continue to discharge until they are too low to operate. When this happens, your LifeBook notebook will go into Sleep mode.

  • Page 61: Replacing The Battery

    Shorted Batteries The Status Indicator panel displays the battery status via the Battery Status indicator to show the charge level available in that battery. If the display is flashing red, it means that the battery is damaged and must be replaced so it does not damage any other parts of your LifeBook notebook. Replacing the Battery By purchasing an additional battery, you can have a fully charged spare to swap with a discharged battery.

  • Page 62: Optical Drive

    Media Holder Tray Media Tray Eject Button Figure 23. Optical Drive Optical Drive Your Fujitsu LifeBook notebook contains an optical drive which is either a Dual-Layer Multi-Format DVD Writer or a Blu-ray™ DVD-ROM player. Optical Drive Media Dual-Layer Multi-Format DVD Writer model only: With this drive, you can play CD-ROM, CD-R, CD- RW, DVD-ROM, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-RAM discs, and record CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD- RAM discs.

  • Page 63: Loading Media

    • RIOR TO USING YOUR APPLICABLE README FILE ON THE PTICAL LAYER SOFTWARE • OU SHOULD PERIODICALLY CHECK THE UPDATED DRIVERS • ROLONGED USE OF THE OPTICAL DRIVE YOUR BATTERY LIFE O NOT OPERATE YOUR OPTICAL DRIVE UNLESS YOUR SURFACE SING A DRIVE WHEN THE SYSTEM IS NOT LEVEL MAY DAMAGE THE DRIVE OR PREVENT PROPER OPERATION Loading Media...

  • Page 64: Removing Media

    Removing Media Push and release the eject button on the front of the optical drive. This will stop the drive and the holder tray will come out of the notebook a short distance. Gently pull the tray out until the disc can easily be removed from the tray. Carefully remove the media disc from the holder tray.

  • Page 65: Playing Media On The Optical Drive

    There are three ways to operate the optical drive: • Using the Optical Player Software • Using the Media Player Buttons • Using the Desktop Control Panel Using the Optical Player Software RIOR TO USING YOUR OPTICAL DRIVE DETAILS ON USING YOUR OPTICAL PLAYER SOFTWARE Starting a DVD Movie Insert the DVD into the notebook’s optical drive.

  • Page 66: Using The Drive On Battery Power

    To Pause the movie, click the To Rewind the movie, click the to the opening screen. To Fast-forward the movie, click the jump to the ending credits. To Stop the movie, click the button. Exiting the Optical Player 1. Click the in the upper right corner of the title bar.

  • Page 67: Autoplay Notification Function

    ’ F YOU DON T STOP THE OPTICAL DRIVE QUICKLY AND THE NOTEBOOK ATTEMPTS TO AUTO CRITICAL BATTERY LOW STATE WILL NEED TO POWER THE SYSTEM UP WITH THE POWER INSTRUCTIONS THAT APPEAR Manually place your notebook into Sleep mode by depressing the Suspend button. Plug in a power adapter and replace the discharged battery with an additional fully-charged battery.

  • Page 68: Pc Cards/Expresscards

    PC Cards/ExpressCards™ Your LifeBook notebook supports Type I and Type II PC Cards and ExpressCards With these cards you can perform a variety of functions depending on which type of card you install. You can install one or two cards at a time, depending on its type. PC Cards should be installed in the bottom slot and ExpressCards in the top slot.

  • Page 69: Removing Pc Cards

    • NSTALLING OR REMOVING A PROCESS MAY DAMAGE THE CARD AND • O NOT INSERT A MAY PERMANENTLY DAMAGE THE CARD See your PC Card manual for instructions on the installation of your card. Some cards may require that your notebook is off while installing them.

  • Page 70: Installing Expresscards

    Installing ExpressCards There are two different width ExpressCards: 34 mm and 54 mm ("ExpressCard 34" and "ExpressCard 54"). . The (Figure 27) connector inside the slot is located on the left-hand side of the slot. If you insert a 34 mm card, be sure to align it with the left side of the slot when inserting it.

  • Page 71: Removing Expresscards

    • NSTALLING OR REMOVING AN MAY DAMAGE THE CARD AND • O NOT INSERT AN AS YOU MAY PERMANENTLY DAMAGE THE CARD • HEN YOU RECEIVE YOUR SYSTEM XPRESS ARD SLOT "R WITH THE EMOVING BE SURE TO RE INSTALL THE SLOT PROTECTOR TO PREVENT THE SYSTEM FROM BEING CONTAMINATED •...

  • Page 72: Memory Stick/Secure Digital/Xd Card Slot

    Memory Stick/Secure Digital/xD Card Slot Your LifeBook notebook supports the following memory cards, on which you can store and transfer data to and from a variety of digital devices. These cards use flash memory architecture, which means they don’t need a power source to retain data. •...

  • Page 73: Inserting Memory Stick/Sd/Xd Cards

    ■ OME OF THE MEDIA IN THE ABOVE LIST MAY HAVE MORE FEATURES THAN OTHERS ■ OPYRIGHT ROTECTION (MMC) ■ ULTI EDIA ARDS Memory Stick is a flash memory technology developed by Sony. Memory Stick allows you to record, transfer and share digital content, such as digital pictures, music, movies, voice, and computer data and applications.
  • Page 74 See your Memory Stick, SD Card, or xD Card manual for instructions on the insertion of your card. Make sure there is no card currently in the slot. If there is, see Removing a Memory Stick/SD/xD Card. Insert the card in an adapter, if required. Insert your card into the slot with the product label facing up.

  • Page 75: Memory Upgrade Module

    Memory Upgrade Module Your notebook has two memory slots, and the system comes with 1 GB, 2 GB, or 4 GB of factory-installed memory. If you have a module installed in only one slot, you can increase your memory capacity by installing another memory module in the empty slot or by increasing the size of the single installed module.

  • Page 76: Installing A Memory Module

    Turn off power to your LifeBook notebook and remove any power adapter. Make sure that all the connector covers are closed. Turn the LifeBook notebook bottom side up, with the front panel toward you. Remove the screws at the front of the memory upgrade module compartment.

  • Page 77: Removing A Memory Upgrade Module

    HE MEMORY UPGRADE MODULE IS NOT SOMETHING YOU SHOULD ROUTINELY REMOVE FROM YOUR NOTEBOOK NCE IT IS INSTALLED SYSTEM MEMORY CAPACITY Removing a Memory Upgrade Module Perform steps 1 through 5 of Installing a Memory Upgrade Module. Pull the clips sideways away from each side of the memory upgrade module at the same time.

  • Page 78: Enabling/Disabling Turbo Memory

    The amount of memory displayed should be approximately the total of all memory modules installed. There may be a discrepancy which is allocated for fixed video memory. F THE TOTAL MEMORY DISPLAYED IS INCORRECT PROPERLY INSTALLED CORRECTLY RECOGNIZED Enabling/Disabling Turbo Memory Turbo Memory is an optional module that is used to act as a cache for frequently-accessed applications and information.

  • Page 79: Device Ports

    Device Ports Your LifeBook notebook comes equipped with multiple ports to which you can connect an external device including disk drives, keyboards, modems, printers, etc. Communications Ports Your LifeBook has a Modem jack (RJ-11) and a LAN jack (RJ-45) to accommodate external communications.
  • Page 80 Select [Start] > Control Panel. Select Classic View in the left pane. Double-click Phone and Modems. You may initially need to enter your area code in order to open the Phone and Modem Options window. Select the Modems tab, and click the [Properties] button. Select the Modem tab and adjust the volume as necessary LAN Port This port allows you to connect a LAN (RJ-45) cable for...

  • Page 81: Ieee 1394 Jack

    The 4-pin IEEE 1394 (Firewire) jack is a high-speed interface (400 Mbps) that can be used to transfer large amounts of data between your notebook and a Firewire peripheral such as a digital camera, external hard drive, or video camera. Hot-swappable and plug-n-play, it is much faster than USB 1.1, CardBus, or parallel port.

  • Page 82: Hdmi Port

    The High-Definition Multimedia Interface (HDMI) port is a digital audio/video interface over which uncompressed streams can be transmitted. HDMI is used to connect compatible digital devices with your computer (such as big- screen TVs and high-end digital cameras and video recorders). To connect an HDMI device: Align the connector with the port opening.

  • Page 83: S-Video Out Port

    S-Video Out Port The S-Video port allows you to connect and use directly any S-Video device, such as a VCR or television. The S-Video standard provides for a higher quality picture than Composite. In order to connect an S-Video device, follow these easy steps: Align the connector with the port opening.

  • Page 84: External Video Port

    • HERE ARE SEVERAL TYPES OF CABLES FOR CONNECTING A DIGITAL ELECTRONIC DEVICE TO THE DIGITAL AUDIO OUT CONNECTOR PTICAL • HE FREQUENCY OF DIGITAL SOUND OUTPUT FROM THE 44.1 Z OR ., MD PLAYER • HE SOUND RECORDED THROUGH CONNECTING A DIGITAL ELECTRONIC DEVICE SPDIF OUTPUT CONNECTOR CANNOT BE USED AS DIGITAL OUTPUT OUTPUT CONNECTOR HAS COPYRIGHT PROTECTION INFORMATION INCLUDED...

  • Page 85: Troubleshooting Your Lifebook

    Chapter 4 Troubleshooting Your LifeBook Troubleshooting There may be occasions when you encounter setup or operating problems that you can solve on the spot, or problems with peripheral devices that can be solved by replacing the device. The information in this section helps you isolate and resolve some straightforward issues and identify failures that require service.
  • Page 86 F YOU KEEP NOTES ABOUT WHAT YOU HAVE TRIED ABLE TO HELP YOU MORE QUICKLY BY GIVING ADDITIONAL SUGGESTIONS OVER THE PHONE If you have tried the solutions suggested in the Troubleshooting Table without success, contact your support representative: Toll free: 1-800-8Fujitsu (1-800-838-5487) E-mail: 8fujitsu@us.fujitsu.com Web site: http://www.computers.us.fujitsu.com/support.

  • Page 87: Specific Problems

    Using the Troubleshooting Table When you have problems with your LifeBook notebook, try to find the symptoms under the Problem column of the troubleshooting table for the feature giving you difficulty. You will find a description of common causes for that symptom under the column Possible Cause and what, if anything, you can do to correct the condition under Possible Solutions.

  • Page 88: Audio Problems

    Problem Possible Cause Audio Problems There is no sound coming The volume is turned from the built-in speakers. too low. The software volume control is set too low. Headphones are plugged into your notebook. Software driver is not configured correctly. The speakers have been muted using the Volume icon in the sys-...

  • Page 89: Hard Drive Problems

    Problem Possible Cause LifeBook notebook fails to Wrong drive designator recognize DVD/CD- was used for the disc in RW/CD-ROM’s. the application. DVD/CD-RW/CD-ROM (continued) is dirty or defective. LifeBook notebook fails to DVD player software is auto-play DVD movie. not installed. Country designator could not be set cor- rectly.

  • Page 90: Memory Problems

    Problem Possible Cause You have installed an exter- Your external device is nal keyboard or mouse, and not properly installed. it does not seem to work. Your operating system software is not set up with correct software driver for that device. You have connected an Your operating system external keyboard or a...

  • Page 91: Usb Device Problems

    Problem Possible Cause USB Device Problems You have installed a USB The device is not prop- device. Your notebook does erly installed. not recognize the device, or The device may have the device does not seem been installed while an to work properly.

  • Page 92: Power Failures

    Problem Possible Cause Power Failures You turn on your LifeBook The installed primary notebook and nothing battery is completely seems to happen. discharged, there is no optional second battery installed or there is no Power adapter installed. The primary battery is installed but is faulty.
  • Page 93 Problem Possible Cause Your LifeBook notebook You are operating on turns off all by itself. battery power and (continued) ignored a low battery alarm until the battery is at the dead battery state and the system has gone into Dead Bat- tery Suspend mode.

  • Page 94: Shutdown And Startup Problems

    Problem Possible Cause The batteries seem to The power savings fea- discharge too quickly. tures may be disabled. The brightness is (continued) turned all the way up. The batteries are very old. The batteries have been exposed to high temper- atures.

  • Page 95: Video Problems

    Problem Possible Cause An error message is dis- Power On Self Test played on the screen during (POST) has detected a the notebook (boot) problem. sequence. Your notebook appears to BIOS setup changes change setup parameters were not saved when when you start it.
  • Page 96 Problem Possible Cause The notebook turned on Power On Self Test has with a series of beeps and detected a failure which the built-in display is blank. does not allow the dis- play to operate. The display goes blank by The notebook has gone itself after you have been into Video timeout,...

  • Page 97: Miscellaneous Problems

    Problem Possible Cause The application display You are running an uses only a portion of your application that does screen and is surrounded not support the sys- by a dark frame. tem’s native pixel reso- lution and display compression is enabled.

  • Page 98: Power On Self Test Messages

    Power On Self Test Messages The following is an alphabetic list of error-and-status messages that Phoenix BIOS and/or your operating system can generate and an explanation of each message. Error messages are marked with an *. If an error message is displayed that is not in this list, write it down and check your operating system documentation both on screen and in the manual.
  • Page 99 *Failure Fixed Disk n (where x=1-4) The fixed disk is not working or not configured properly. This may mean that the hard drive type identified in your setup utility does not agree with the type detected by the Power On Self Test. Run the setup utility to check for the hard drive type settings and correct them if necessary.
  • Page 100 *Stuck Key BIOS discovered a stuck key and displays the scan code for the stuck key. You may have to replace your keyboard but may be able to use an external keyboard until then. Contact your support representative. *Monitor type does not match CMOS – Run SETUP Monitor type not correctly identified in Setup.
  • Page 101 *Previous boot incomplete – Default configuration used Previous Power On Self Test did not complete successfully. The Power On Self Test will load default values and offer to run Setup. If the previous failure was caused by incorrect values and they are not corrected, the next boot will likely fail also.

  • Page 102: Modem Result Codes

    *System RAM Failed at offset: nnnn System memory failed at offset nnnn of in the 64k block at which the error was detected. This means that there is a fault in your built-in memory. If you continue to operate, you risk corrupting your data. Contact your support representative for repairs.
  • Page 103 • RING (This means an incoming call.) • BUSY • NO ANSWER When using the internal modem with applications that are not factory installed refer to the application documentation. 98 - Troubleshooting...

  • Page 104: Restoring Your Pre-Installed Software

    Restoring Your Pre-installed Software The Drivers and Applications Restore (DAR) CD contains sets of device drivers and Fujitsu utilities (in specific directories) that are unique to your computer configuration for use as documented below. F YOU HAVE ACCESS TO THE INTERNET HTTP INFORMATION Re-installing Individual Drivers and Applications...

  • Page 105: Restoring The Operating System For Windows Xp Systems

    In the list, check off all the components you want to install. If you want to install all components, click [Select All]. Clicking [Select All] will select all of the blue-coded components; you must select grey and green components separately. Once you have selected the components you wish to install, click [Install Selected Subsystems];...

  • Page 106: Restoring The Operating System For Windows Vista Systems

    Power on your system. When the Fujitsu logo appears on the screen. press the [Enter] key or click on the left mouse or touchpad button; the TrustedCore Menu will appear. Select the Boot Menu from the TrustedCore Menu. Highlight the CD/DVD option, then click [OK]. Insert the Recovery and Utility Disc into the drive tray.
  • Page 107 Determining whether Recovery and Utility is pre-loaded Turn on or reboot your system. When the Fujitsu logo appears, press [F12] key. From the Boot Menu that appears, check whether the <Recovery and Utility> option is present. If it is not present, it means that the utility must be used from the disc.
  • Page 108 BOOT Priority Change Before restoring an image, you must first verify that the system is set up to boot from the optical drive. To verify/change the boot-up priority (rather than booting-up from the hard drive or an external floppy disk drive), perform the following steps: Power on your system.
  • Page 109 Recovery and Utility tabs Diagnostics tab: The Diagnostics tool is designed for use by IT professionals. It is not likely you will need to use this tool. When you select devices from the Diagnosis window then click [Execute], several tests are performed on the selected components.

  • Page 110: Automatically Downloading Driver Updates

    Automatically Downloading Driver Updates Your system has a convenient tool called the Fujitsu Driver Update (FDU) utility. With FDU, you can choose to automatically or manually go to the Fujitsu site to check for new updates for your system. The FDU icon should appear in the system tray at the bottom right of your screen (roll the cursor over the icons to find the correct one).

  • Page 111: Care And Maintenance

    Chapter 5 Care and Maintenance Caring for your LifeBook Notebook If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. • • HE SYSTEM CONTAINS COMPONENTS THAT CAN BE SEVERELY DAMAGED BY ELECTROSTATIC DISCHARGE O MINIMIZE RISK TO THE COMPONENTS OBSERVE THE FOLLOWING PRECAUTIONS...
  • Page 112 • Make a habit of transporting it in a suitable carrying case. • Do not attempt to service the computer yourself. Always follow installation instructions closely. • Keep it away from food and beverages. • To protect your notebook from damage and to optimize system performance, be sure to keep all air vents unobstructed, clean, and clear of debris.

  • Page 113: Cleaning Your Lifebook Notebook

    • Always disconnect the power plug. (Pull the plug, not the cord.) • Clean your LifeBook notebook with a damp, lint-free cloth. Do not use abrasives or solvents. • Use a soft cloth to remove dust from the screen. Never use glass cleaners. •...

  • Page 114: Storing Your Lifebook Notebook

    • Wipe the surface with a soft cloth wipe and a 50% ethanol solution or use another ethanol-based germicide which has been registered as a hospital disinfectant by the EPA. • SE OF INCORRECT CLEANERS CAN RESULT IN OPTICAL IMPAIRMENT OF THE COMPUTER LWAYS REFER TO THE CLEANER MANUFACTURER SHEETS FOR PROPER HANDLING AND USE OF THE PRODUCTS...

  • Page 115: Traveling With Your Lifebook Notebook

    • Do not transport your notebook while it is turned on. • It is recommended that you carry your notebook with you while traveling, rather than checking it in as baggage. • Always bring your System Recovery CD that came with your notebook when you travel. If you experience system software problems while traveling, you may need it to correct any problems.

  • Page 116: Batteries

    Caring for your Batteries • Always handle batteries carefully. • Do not short-circuit the battery terminals (that is, do not touch both terminals with a metal object). Do not carry lose batteries in a pocket or purse where they may mix with coins, keys, or other metal objects.

  • Page 117: Media Care

    Caring for your Media (DVD/CD/CD-R) Media discs are precision devices and will function reliably if given reasonable care. • Always store your media disc in its case when it is not in use. • Always handle discs by the edges and avoid touching the surface. •...

  • Page 118: Pc/Expresscards

    • Avoid using or storing the drive where it will be subjected to shock or vibration. • Do not disassemble or dismantle the optical drive. • Use of a commercially available lens cleaner is recommended for regular maintenance of your drive.

  • Page 119: System Specifications

    Chapter 6 System Specifications Specifications This section provides the general hardware and environmental specifications for your LifeBook notebook. Specific details about your system may vary from those referenced here. For an updated list of current configurations, please go to the Fujitsu Computer Systems Corporation Website at: us.fujitsu.com/computers.

  • Page 120: Microprocessor

    Part Number Part No: FPC0xxxxxxxxxxxxx N6470, 17WXGA+, T7250, VHP, DL S-MULTI, 1GB, 320G, MDM/LAN, WLAN Model # Processor Screen Size Figure 41. Configuration Label Microprocessor Intel® Core™ 2 Duo processor. To determine the type and speed of your processor, right-click My Computer, select Properties, then select the General tab, or check the configuration label.

  • Page 121: Video

    • Built-in 17" Color Enhanced Crystal View flat-panel Wide XGA+ TFT active matrix Crystal View (high contrast: 600:1 contrast ratio; high brightness: 370 nits) LCD display with simultaneous display capability. • Visual Optimizer button to dynamically and automatically enhance video images for optimal quality.

  • Page 122: Mass Storage Devices

    Hard Disk Drives • Optional second hard disk drive (Note that the optional second hard disk drive is a factory-installed option, and cannot be purchased as an accessory.) • Hard Disk Drive configurations available: (Note that all hard disk drives are Serial-ATA) 160 GB (5400 rpm) + 160 GB (5400 rpm) = 320 GB 250 GB (5400 rpm) + 250 GB (5400 rpm) = 500 GB 300 GB (5400 rpm) + 300 GB (5400 rpm) = 600 GB...

  • Page 123: Device Ports

    Biometric Security Fingerprint recognition sensor helps to guard against unauthorized system access. Communications • Integrated Broadcom 10 Base-T/100 Base-TX/1000 Base-T Gigabit Ethernet LAN • Internal V.90 standard 56K* fax/modem (ITU V.90, 56K data, 14.4K fax). • Intel® Wireless Wi-Fi Link 4965AGN (quad-mode 802.11a/b/g/draft-N) or Intel Pro/Wireless 3945ABG Network Connection (802.11a/b/g) * Actual data transfer rate over U.S.

  • Page 124: Keyboard

    Built-in keyboard with all functions of 103 key keyboards. • Total number of keys: 103 • Function keys: 12, [F1] through [F12] • Feature extension key: [Fn] • Windows keys: 2 (Start key and Application key) • Key pitch: 19 mm •...

  • Page 125: Dimensions

    Dimensions Overall Dimensions 15.87" x 11.61" x 1.79"/2.02" (403 mm x 295 mm x 45.5/51.3 mm) Weight Non-TV tuner model (with one hard disk drive): Approximately 9.92 lbs. (4.5 Kg) TV tuner model (with one hard disk drive): Approximately 10.12 lbs. (4.59 Kg) TV tuner model (with two hard disk drives): Approximately 10.58 lbs.
  • Page 126 • EverNote • Fujitsu Driver Update utility • Google Desktop • Google Tool Bar • Google Picasa • LifeBook Application Panel • Roxio Easy Media Creator • OmniPass Fingerprint Recognition Utility • Symantec Norton Internet Security 2007 (90-day free trial). •...

  • Page 127: Learning About Your Software

    Learning About Your Software Tutorials All operating systems and most application software have tutorials built into them. We recommend that you step through the tutorial before you use an application. Manuals Included with your notebook you will find manuals for your installed operating system and other pre- installed software;...
  • Page 128 Google Picasa Google Picasa lets you to search for, locate, move and label all of the photos on your computer. LifeBook Application Panel Software Your LifeBook is pre-installed with software utilities that let you operate and configure your LifeBook Application Panel. The Application Panel utilities are found under the Control Panel > Application Panel. Roxio Easy Media Creator Easy Media Creator allows you to easily burn CDs and edit and share photos, music, data, and videos.
  • Page 129 CyberLink PowerDVD PowerDVD from CyberLink is a versatile DVD player software application. PowerDVD provides high- quality video and audio playback on your system. Operating System Options Depending upon your system, one of the following operating system configurations will be installed: Microsoft Windows Vista Home Premium Edition With Microsoft Works 9.0 Home and Student Trial Edition Microsoft Windows Vista Business Edition...

  • Page 130: Glossary

    Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your LifeBook notebook. Access point Wireless network device used to bridge wireless and wired network traffic. ACPI Advanced Configuration and Power Interface Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen.
  • Page 131 ADSL Asymmetric Digital Subscriber Line. Technology for transporting high bit-rate services over ordinary phone lines. Accelerated Graphics Port. Graphics port specifically designed for graphics-intensive devices, such as video cards and 3D accelerators. Auto/Airline Adapter A device which converts the DC voltage from an automobile cigarette lighter or aircraft DC power outlet to the DC voltage needed to power your LifeBook notebook.
  • Page 132 An electrical circuit which passes data between the CPU and the sub-assemblies inside your LifeBook notebook. Byte 8 bits of parallel binary information. Cache Memory A block of memory built into the micro-processor which is much faster to access than your system RAM and used in specially structured ways to make your overall data handling time faster.
  • Page 133 COM Port Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk. Configuration The combination of hardware and software that makes up your system and how it is allocated for use. Cathode Ray Tube.
  • Page 134 DIMM Dual-in-line memory module. Disk A spinning platter of magnetic data storage media. If the platter is very stiff it is a hard drive, if it is highly flexible it is a floppy disk, if it is a floppy disk in a hard housing with a shutter it is commonly called a diskette.
  • Page 135 Disk Operating System (MS-DOS is a Microsoft Disk Operating System). Driver A computer program which converts application and operating system commands to external devices into the exact form required by a specific brand and model of device in order to produce the desired results from that particular equipment.
  • Page 136 Floppy Disk A spinning platter of magnetic data storage media which is highly flexible. Gigabyte. One billion bytes. Hard drive A spinning platter of magnetic data storage media where the platter is very stiff. Input/Output. Data entering and leaving your notebook in electronic form. I/O Port The connector and associated control circuits for data entering and leaving your notebook in electronic form.
  • Page 137 IEEE802.11g Wireless LAN standard that supports a maximum data rate of 54 Mbps. 802.11g devices operate in the 2.4 GHz ISM band. Infrared Light just beyond the red portion of the visible light spectrum which is invisible to humans. Infrastructure A name of a wireless LAN configuration.
  • Page 138 An abbreviation for infrared. IrDA Infrared Data Association. An organization which produces standards for communication using infrared as the carrier. Interrupt Request. An acronym for the hardware signal to the CPU that an external event has occurred which needs to be processed. Kilobyte.
  • Page 139 MAC Address Media Access Control Address. A unique physical address of a network card. For Ethernet, the first three bytes are used as the vendor code, controlled and assigned by IEEE. The remaining three bytes are controlled by each vendor (preventing overlap), therefore, every Ethernet card is given a unique physical address in the world, being assigned with a different address from other cards.
  • Page 140 Maximum Transmission Unit The maximum data size that can be transferred at a time through the Internet or other networks. You can set a smaller MTU size to obtain successful communication, if you have difficulty transferring data due to the fact that the maximum size is too large. Network key Data that is used for encrypting data in data communication.
  • Page 141 Partition A block of space on a hard drive which is set aside and made to appear to the operating system as if it were a separate disk, and addressed by the operating system accordingly. PCMCIA PCMCIA is a trademark of the Personal Computer Memory Card International Association. The Personal Computer Memory Card International Association is an organization that sets standards for add-in cards for personal computers.
  • Page 142 Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. Protocol Procedures and rules use to send and receive data between computers. - Method of sending and receiving data - Process used to handle communication errors Conditions required for communication are organized in procedures for correct transfer of information.
  • Page 143 Read Only Memory. A form of memory in which information is stored by physically altering the material. Data stored in this way can not be changed by your notebook and does not require power to maintain it. SDRAM Synchronous Dynamic Random Access Memory. Serial Port A connection to another device through which data is transferred one bit at a time on a single wire with any other wires only for control of the device not for transfer of data.
  • Page 144 Status Indicator A display which reports the condition of some portion of your hardware. On your LifeBook notebook this is an LCD screen just above the keyboard. Stereo (audio) A system using two channels to process sound from two different sources. Subnet mask TCP-IP network is controlled by being divided into multiple smaller networks (subnets).
  • Page 145 Thin Film Transistor – A technology for flat display panels which uses a thin film matrix of transistors to control each pixel of the display screen individually. Underwriters Laboratories – An independent organization that tests and certifies the electrical safety of devices.

  • Page 146: Regulatory Information

    Regulatory Information Notice Changes or modifications not expressly approved by Fujitsu could void this user’s authority to operate the equipment. FCC Notices Notice to Users of Radios and Television This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 147 Notice to Users of the US Telephone Network This equipment complies with Part 68 of FCC rules, and the requirements adopted by ACTA. On the bottom of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment;...
  • Page 148 If trouble is experienced with this equipment, for repair or warranty information, please refer to the manual or contact Fujitsu Computer Systems Corporation, Customer Service. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.
  • Page 149 connect this equipment to the local telecommunication facilities. The user should be aware that compliance with the certification standards does not prevent service degradation in some situations. Repairs to telecommunication equipment should be made by a Canadian authorized maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 150 maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique. AVIS: L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.1B. L’IES assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent être raccordés à...

  • Page 151: Appendix A: Wlan User's Guide

    Appendix A: WLAN User’s Guide FCC Regulatory Information Please note the following regulatory information related to the optional wireless LAN device. Regulatory Notes and Statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN devices. The energy levels of these emissions, however, are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones.
  • Page 152 Regulatory Information/Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer.
  • Page 153 FCC Radio Frequency Exposure statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF Exposure from radio frequency devices.

  • Page 154: Before Using The Wireless Lan

    Before Using the Wireless LAN This manual describes the procedures required to properly set up and configure the integrated Wireless LAN Mini-PCI device (referred to as "WLAN device" in the rest of the manual). Before using the WLAN device, read this manual carefully to ensure it's correct operation. Keep this manual in a safe place for future reference.

  • Page 155: Wireless Lan Modes Using This Device

    Wireless LAN Modes Using this Device Ad Hoc Mode (See Figure A-1) "Ad Hoc Mode" refers to a wireless network architecture where wireless network connectivity between multiple computers is established without a central wireless network device, typically known as Access Point(s). Connectivity is accomplished using only client devices in a peer-to- peer fashion.
  • Page 156 Access Point (Infrastructure) Mode (See Figure A-2) Infrastructure mode refers to a wireless network architecture in which devices communicate with wireless or wired network devices by communicating through an Access Point. In infrastructure mode, wireless devices can communicate with each other or with a wired network. Corporate wireless networks operate in infrastructure mode because they require access to the WLAN in order to access services, devices, and computers (e.g., file servers, printers, databases).

  • Page 157: How To Handle This Device

    The WLAN device comes pre-installed in your mobile computer. Under normal circumstances, it should not be necessary for you to remove or re-install it. The Operating System that your mobile computer comes with has been pre-configured to support the WLAN device. •...

  • Page 158: Activating The Wlan Device

    Activating the WLAN Device Activation of the WLAN device can be accomplished using the same methods as the deactivation process, by using the Wireless On/Off Switch. Configuring the WLAN The WLAN device can be configured to establish wireless network connectivity using the software that is built into Windows Vista.

  • Page 159: Connecting To A Network

    After you have configured your computer, you can connect to an active network by performing the following steps: Click on the WLAN icon in the system tray. Select “Connect to a network”. Select a network from the list that appears, and click the [Connect] button. 154 - Before Using the Wireless LAN...

  • Page 160: Troubleshooting The Wlan

    Troubleshooting the WLAN Troubleshooting Table Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table. Problem Unavailable network connection Possible Cause Possible Solution Incorrect network name Ad hoc connection: verify that the network names (SSID’s) (SSID) or network key and network keys (WEP) of all computers to be connected have been configured correctly.
  • Page 161 Problem Possible Cause Unavailable The WLAN device has network been deactivated or connection disabled (continued) The computer to be connected is turned off RF interference from Access Points or other wireless networks Wireless network authentication has failed Incorrectly configured network settings Incorrect IP address configuration 156 - Troubleshooting the WLAN...

  • Page 162: Wlan Specifications

    WLAN Specifications Item Type of network Transfer rate Active frequency Number of channels Typical operating distances** 157 - Troubleshooting the WLAN Specification The Intel PRO/Wireless 3945ABG Network Connections WLAN device conforms to IEEE 802.11a and 802.11b/g (Wi-Fi based)*. The Intel PRO/Wireless 4965AGN Network Connections WLAN device conforms to IEEE 802.11a, 802.11b/g, and 802.11n (draft), Wi-Fi based* (Automatic switching) 54 Mbps maximum data rate (IEEE802.11n rates to be determined)
  • Page 163 Security Maximum recommended number of computers to be connected over wireless LAN (during ad hoc connection) “Wi-Fi based” indicates that the interconnectivity test of the organization which guarantees the interconnectivity of wireless LAN (Wi-Fi Alliance) has been passed. The communication ranges shown above will increase or decrease depending on factors such as number of walls, reflective material, or interference from external RF sources.

  • Page 164: Appendix B: Fingerprint Sensor Device

    Appendix B: Fingerprint Sensor Device Introducing the Fingerprint Sensor Device Your system has a fingerprint sensor device below the Touchpad, between the left and right buttons. This also serves as a scroll button. FINGERPRINT SENSOR CAN BE USED FOR SCROLLING SENSOR THE SAME AS YOU WOULD USE A SCROLL BUTTON B-1: Fingerprint sensor LTHOUGH THE SYSTEM HAS A FINGERPRINT SENSOR IN PLACE OF A SCROLL BUTTON...

  • Page 165: Getting Started

    • Log onto Windows • Resume from standby mode • Cancel a password-protected screen saver • Log into homepages that require a username and password After you have “enrolled” - or registered - your fingerprint, you can simply swipe your fingertip over the sensor for the system recognize you.
  • Page 166 • The Softex program group in the Programs group of the Start menu System Requirements The OmniPass application requires space on your hard drive; it also requires specific Operating Systems (OS’s). The minimum requirements are as follows: • Windows XP Professional operating system •...
  • Page 167 Verifying Information about OmniPass After you have completed installing OmniPass and restarted your system, you may wish to check the version of OmniPass on your system. To check the version information of OmniPass: From the Windows Desktop, double-click the key-shaped OmniPass icon in the taskbar (usually located in the lower right corner of the screen), Click the Start button, select Settings, and click Control Panel (if you are using Windows XP you will see the Control Panel directly in the Start menu;...

  • Page 168: User Enrollment

    Follow the directions to uninstall the OmniPass application. Once OmniPass has finished uninstalling, reboot your system when prompted. User Enrollment Before you can use any OmniPass features you must first enroll a user into OmniPass. Master Password Concept Computer resources are often protected with passwords. Whether you are logging into your computer, accessing your email, e-banking, paying bills online, or accessing network resources, you often have to supply credentials to gain access.
  • Page 169 HE ENROLLMENT PROCEDURE ASSUMES YOU HAVE NO HARDWARE AUTHENTICATION DEVICES OR ALTERNATE STORAGE LOCATIONS THAT YOU WISH TO INTEGRATE WITH SUCH FUNCTIONALITY Basic Enrollment The Enrollment Wizard will guide you through the process of enrolling a user. Unless you specified otherwise, after OmniPass installation the Enrollment Wizard will launch on Windows login.
  • Page 170 Enrolling a Fingerprint Enrolling a fingerprint will increase the security of your system and streamline the authentication procedure. You enroll fingerprints in the OmniPass Control Center. With an OmniPass user logged in, double-click the system tray OmniPass icon. Select the User Settings tab and click Enrollment under the User Settings area.

  • Page 171: Using Omnipass

    Using OmniPass You are now ready to begin using OmniPass. Used regularly, OmniPass will streamline your authentications. Password Replacement You will often use the password replacement function. When you go to a restricted access website (e.g., your bank, your web-based email, online auction or payment sites), you are always prompted to enter your login credentials.
  • Page 172 Using the following procedure, you can store a set of credentials into OmniPass. These credentials will then be linked to your “master password” or fingerprint. Go to a site that requires a login (username and password), but do not log in yet. At the site login prompt, enter your username and password in the prompted fields, but do not enter the site (do not hit [Enter], [Submit], [OK], or Login).
  • Page 173 HIS SETTING IS MORE CONVENIENT IN THAT WHENEVER YOU GO TO A SITE REMEMBERED WITH THIS SETTING YOU WILL BYPASS ANY AUTHENTICATION PROCEDURE AND GAIN INSTANT ACCESS TO THE SITE UT SHOULD YOU LEAVE YOUR SYSTEM UNATTENDED WITH YOUR ANYONE USING YOUR SYSTEM CAN BROWSE TO YOUR PASSWORD PROTECTED SITES AND GAIN AUTOMATIC ACCESS If you uncheck both boxes in Settings for this Password Site, OmniPass will prompt you for your master password or fingerprint authentication device.
  • Page 174 Logging into Windows with a Fingerprint Device When logging into Windows with a fingerprint device, the fingerprint capture window will now appear next to the Windows Login screen. Place your enrolled fingertip on the sensor to authenticate. You will be simultaneously logged into Windows and OmniPass. The capture window will also appear if you have used Ctrl-Alt-Del to lock a system, and the fingerprint device can be used to log back in as stated above.
  • Page 175 The two check boxes in Manage Passwords govern whether OmniPass prompts you to authenticate or directly logs you into the remembered site. OmniPass will overwrite an old set of credentials for a website if you attempt to use Remember Password on an already remembered site. The exception to the above rule is when resetting the Windows password.

  • Page 176: Configuring Omnipass

    [Apply] to ensure the settings are saved. If you log in to OmniPass with a fingerprint device, you will automatically be logged in to the default identity for that OmniPass user. You can choose the identity with which you are logging in if you login using "master password". Choosing User Identity during Login To choose your identity during login, type your username in the User Name: field.
  • Page 177 process backs up all remembered sites, credentials, and enrolled fingerprints for an OmniPass user. All OmniPass data for a user is backed up to a single encrypted database file. During the import process, the Windows login of the exported user is required. If the proper credentials cannot be supplied, the user profile will not be imported •...

  • Page 178: Omnipass Control Center

    will need User Name, Password, and Domain. If you don’t remember the value for Domain, in a PC or SOHO environment Domain should be your computer name. OmniPass will notify you if the user was successfully imported. Things to Know Regarding Import/Export •...
  • Page 179 double-click the Softex OmniPass icon. User Management The User Management tab has two major interfaces: Add/Remove User and Import/Export User. Import/Export User functionality is documented in “Exporting and Importing Users” on page 171. Add/Remove User functionality is straightforward. If you click Adds a new user to OmniPass you will start the OmniPass Enrollment Wizard. The Enrollment Wizard is documented in “User Enrollment”...

  • Page 180: Troubleshooting

    System Settings The OmniPass Startup Options interface can be found in the System Settings tab. With these options you can specify how your OmniPass Logon is tied to your Windows Logon. The first option, Automatically log on to OmniPass as the current user, will do just as it says; during Windows login, you will be logged on to OmniPass using your Windows login credentials.
  • Page 181 Cannot add a User with a Blank Password to OmniPas If you experience difficulties adding a user with a blank password to OmniPass, you may need to adjust your local security settings. First attempt the procedure explained in the Cannot add Windows user to OmniPass section.

  • Page 182: Index

    Index About This Guide adapter plug adapters Air Vents Application/Media Player Buttons Audio Auto Insert Notification Auto/Airline Adapter Automatically Downloading Driver Updates Battery care Charge/DC-In Indicator charging indicators conserving power dead faulty increasing life lithium ion battery problems recharging replacing shorted sleep mode Battery Pack Lock...
  • Page 183 19, 38 DC Power Jack Device Ports Display Panel adjusting brightness closing latch opening problems Double-Clicking Dragging Drivers and Application Restore CD DVD drive problems Error Messages ExpressCard Eject Button problems External Monitor Port 13, 159 Fingerprint Sensor Device enrolling a fingerprint installing OmniPass logging into a remembered site OmniPass authentication toolbar...
  • Page 184 Media Player Care Memory capacity compartment installing problems removing upgrade module Memory Stick/SD/xD Card installing slot Microphone Jack Microsoft Works Modem problems Modem Jack Modem Result Codes Mouse problems Norton NumLk Optical Drive Control Panel loading removing media tray release using PC Card removing...
  • Page 185 Save-to-Disk ScrLk SD Card, Installing Sleep Mode Specifications Status Indicator Panel Subwoofer S-Video Out Port Theft Prevention Lock Slot 28, 31 Touchpad Touchpad Pointing Devic Troubleshooting 17, 77 Universal Serial Bus Port Using the Media Player Video Video RAM Visual Optimizer Visual Optimizer Button 13, 32 Volume Control...

Table of Contents