Download Print this page

Advertisement

F u j i t s u C o m p u t e r S y s t e m s C o r p o r a t i o n
Remote Control User's Guide
I N S T R U C T I O N S
This user's guide contains information on using the Fujitsu Remote
Control with systems running Microsoft® Windows Vista® Home
Premium or Windows Vista® Ultimate edition as the operating system.
You are strongly advised to read this manual to familiarize yourself with
the features of the remote control.
Determining Your System Configuration
Your remote control can be used with your computer whether you have
a TV tuner or not. If you do not have a TV tuner, you can use the remote
control to perform such operations as playing DVDs, listening to music,
or viewing digital photo albums.
If you have a TV tuner installed (built-in, installed on PC Card, or
connected externally via USB), you can use the remote to control the
channel and volume, pause live TV, and record TV programs.
Figs. 1 through 3 illustrate the three ways your system can be
configured:
No TV Tuner
Built-in TV Tuner with direct signal
External TV Tuner
Note that the port locations and system
configurations illustrated in this manual may differ
from your actual configuration. See you system
user's guide for actual location/configuration.

Advertisement

   Also See for Fujitsu A6110 - LifeBook - Core 2 Duo 2.2 GHz

   Related Manuals for Fujitsu A6110 - LifeBook - Core 2 Duo 2.2 GHz

   Summary of Contents for Fujitsu A6110 - LifeBook - Core 2 Duo 2.2 GHz

  • Page 1

    Remote Control User’s Guide I N S T R U C T I O N S This user’s guide contains information on using the Fujitsu Remote Control with systems running Microsoft® Windows Vista® Home Premium or Windows Vista® Ultimate edition as the operating system.

  • Page 2

    To USB port Remote Control IR Receiver Remote Control Figure 1. Configuration with no TV Tuner RF Coaxial cable to cable connector or antenna To USB port Antenna Adapter Cable Remote Control IR Receiver Remote Control Figure 2. Configuration with TV Tuner and Direct Signal...

  • Page 3

    RF Coaxial cable to cable connector or antenna To USB port To USB port* Remote Control IR Receiver *Some external TV tuners can be connected via USB; other Remote designs can be connected Control via PC or ExpressCard slot. Figure 3. Configuration with External TV Tuner Items included in Remote Control Package Before using the remote control, make sure the following items are included in the remote control package (Figure 5).

  • Page 4: Installing Batteries

    Optical Remote PQRS WXYZ Control IR Receiver CLEAR ENTER Remote 2 AA Alkaline Control Batteries Figure 4. Remote Control and Accessories Use only the remote that came with this ■ package when operating Vista Media Center. No cables or accessories other than those ■...

  • Page 5

    1. Open the lid of the battery compartment on the bottom of the remote control by pushing it in the direction shown in Figure 5. Battery Compartment Figure 5. Opening the battery compartment 2. Insert the batteries with the polarities indicated on the bottom of the compartment and replace the cover.

  • Page 6

    Connecting optical remote control IR receiver In order to allow a suspended system to “wake up” using the remote control, you must ensure that it is enabled in the Windows Mobility Center. To do so, follow the instructions in “Setting up Mobility Center to use remote control”...

  • Page 7: Using The Remote Control

    Find the tile labeled “Wake up by USB device”, and see if it is set to Enable or Disable. If it is set to Enable, click the [Change] button. If it is set to Disable, no action is required. Using the remote control To use the remote control, you must use the remote control receiver included with the remote control.

  • Page 8

    Effective distance/location for remote control (Figure 12) Horizontal (left and right from center-point): Approximately 45 degrees Vertical (left and right from center-point): Approximately 45 degrees Distance from remote control to receiver: 3 meters max. 3 meters 3 meters Figure 7. Effective distance/location of remote control...

  • Page 9: Remote Control Features

    Remote control features Each button on the remote control is explained in this section. PQRS WXYZ CLEAR ENTER Figure 8. Remote control buttons...

  • Page 10

    Purpose/ Purpose Icon Play Pressing this button causes a selected recording to start playing. If you press this button while a DVD, a Pause recording, or live TV is playing, play will stop temporarily. Pressing this button while play has been paused, play will restart. Pressing this button while the computer is active will normally put the computer into standby.

  • Page 11

    Purpose/ Purpose Icon Pressing this button will cause the program Skip or DVD being viewed to jump to the next chapter. Pressing this button will display all relevant More information on replaying DVD-VIDEO, CD music, or recorded programs on screen. Navigation Pressing one of these buttons allow you to Buttons...

  • Page 12

    Purpose/ Purpose Icon Pressing this button will enter the letters or ENTER numbers input on screen. Pressing this button will clear the numbers CLEAR or letters input on the screen one by one. Recorded TV Pressing this button will display a list of all recorded programs on the screen.

  • Page 16

    For technical support call 1-800-8fujitsu or send e-mail to: 8fujitsu@us.fujitsu.com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu, Ltd. Microsoft, Windows, and Windows Vista are trademarks or registered trademarks of the Microsoft Corporation. All other trademarks mentioned herein are the property of their respective owners.

This manual also for:

N6460 - lifebook, A6110 - 2 2.2

Comments to this Manuals

Symbols: 0
Latest comments: