Removing The Consumer Ir Board; Replacing The Consumer Ir Board - Dell Alienware M17X R2 Service Manual

Removing the Consumer IR Board

1. Follow the instructions in "Before You Begin" on page
2. Remove the system board (see "Removing the System Board" on page
3. Remove the speakers (see "Removing the Speakers" on page
4. Remove the two screws that secure the consumer IR board to the computer
base.
5. Lift the consumer IR board off the computer base.

Replacing the Consumer IR Board

1. Follow the instructions in "Before You Begin" on page
2. Place the consumer IR board on the computer base.
3. Replace the two screws that secure the consumer IR board to the computer
base.
4. Replace the speakers (see "Replacing the Speakers" on page
5. Replace the system board (see "Replacing the System Board" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
6.
99).
105).
6.
105).
102).
1 consumer IR board
CHAPTER 24: CONSUMER IR BOARD
2
1
2 screws (2)
0108
/
0108