Table of Contents
Advertisement
10.
Bend the display assembly towards the computer base at a 45-degree angle
and lift the display assembly off the computer.
1
1 display assembly
Replacing the Display Assembly
1.
Follow the instructions in "Before You Begin" on page
2.
Align the screw holes on the display hinges with the computer base.
3.
Replace the four screws (two on each hinge) that secure the display
assembly to the computer base.
4.
Replace the magnesium cover (see "Replacing the Magnesium Cover" on
page 52).
5.
Replace the left and right brackets (see "Replacing the Brackets" on page
6.
Replace the palm rest (see "Replacing the Palm Rest" on page
7.
Replace the keyboard (see "Replacing the Keyboard" on page
8.
Replace the center control cover (see "Replacing the Center Control Cover"
on page 35).
9.
Replace the compartment door (see "Replacing the Compartment Door" on
page 14).
10.
Replace the battery pack (see "Replacing the Battery Pack" on page
CAUTION: Before turning on the computer, replace all screws and ensure
that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
CHAPTER 13: DISPLAY
6.
47).
44).
39).
11).
056
/
056
Advertisement
Table of Contents
