Step 4 - Launch Web Browser And Login - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Hp procurve msm integration guide

Hide thumbs Also See for PowerConnect W Clearpass 100 Software:

Table of Contents

Step 4 – Launch Web Browser and login

When the web browser on the test laptop is launched the MSM will automatically capture the

session and redirect the user to the amigopod hosted login page as shown below (which was

defined in the Public Access LOGIN-URL)

Enter the test user details entered and recorded in Step 1 above and click the Login button.

At this point the test user should be successfully authenticated and allowed to transit through

the controller and onto the Internet or Corporate network.

Note: If the web browser fails to redirect check that the DNS server configured in the base

Trapeze configured defined before Step 1 is available and successfully resolving domain

names. Without name resolution working the web browser will never attempt to connect to the

website defined in web browser home page and therefore there is no session for the HP

ProCurve controller to redirect. Other situations that can cause issues with the captive portal

include but are not limited to:

Web browser home page set to intranet site not available in current DNS

•

Proxy Server configuration in browser using non standard HTTP ports

•

CONFIDENTIAL

Table of Contents

Need help?

Do you have a question about the PowerConnect W Clearpass 100 Software and is the answer not in the manual?

Amigopod