Step 4 – Enable Authentication On Default Service Zone - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Step 4 – Enable Authentication on Default Service Zone
In order for the DSA to be able to intercept and redirect any new Guest users to the amigopod
hosted Web Login page, the gateway must have Authentication Required enabled for the
Security Zone in question. By default the following table displays the factory configured Security
Zones and their disabled authentication state:
Click on the Configure button for the Default Security Zone shown above and scroll down to the
Authentication Settings section.
Firstly make sure the Authentication Required For the Zone option is Enabled.
Next, under the Authentication Options section immediately below ensure the radio button in the
Default column for RADIUS Auth Database is checked and enabled.
20
CONFIDENTIAL