If your design requires the use of other Service Zones than the Default Service Zone then the
NAT settings for these zones will also have to be updated.
If you intend to run your network in a routed environment you will either need to update your
routing tables on the default gateway router that is servicing the network the WAN1 port of the
DSA is connected to and / or add a static route to the amigopod configuration.
To add a static route to your amigopod install, browse to the Administrator ! Network Interfaces
menu option and select your active Ethernet adaptor. In our case eth1 is connected to the local
lab network as shown below:
14
CONFIDENTIAL