Test Environment - AMIGOPOD PowerConnect W Clearpass 100 Software Integration Manual

Test Environment

The test environment referenced throughout this integration guide is based on a D-Link DSA-
3600 Multi-Service Business Gateway. Although this low end hardware platform has been used,
the testing and therefore this procedure is valid for all DSA hardware variants from D-Link as it
is the DSA software that is providing the integration points with amigopod.
The following table shows the software versions used during the integration testing. This
document will be updated in the future if changes in either amigopod or D-Link subsequent
releases affect the stability of this integration. It is advised that the customer always check for
the latest integration guide available from either amigopod or Trapeze.
Date Tested:
AmigoPod Version:
Plugins Required:
DSA Version:
Integration:
Amigopod was deployed locally on the WAN1 interface of the D-Link DSA3600 Gateway as a
VMWare image running on a test laptop. Although the VMWare image has been used the
integration is equally valid for the amigopod appliance and self installing DVD deployment
variants.
DSA WAN1 IP Address
DSA Default Service Zone IP Address
Internet Gateway Address
amigopod IP Address
amigopod RADIUS port
CONFIDENTIAL
December 2009
Kernel!2.0.20, Radius Services! 2.0.20
Standard build only
3.50.00
HTTP Captive Portal
10.0.20.166
192.168.1.1
10.0.20.1
10.0.20.54
Auth 1812 Acc 1813 (default settings)
4