Brocade Communications Systems PowerConnect B-FCXs Release Note page 51

Defect ID: DEFECT000278971
Summary: After the ASBR creates a summary LSA, the more specific LSAs are not flushed from neighbor
routers.
Symptom: Customer creates summary for external routes to conserve system resource, but they will not
achieve the goal until the LSAs are aged out on neighbor routers, and the maximum waiting
time could be 1800 seconds. Since the ASBR which originates these LSA will not flush them
with an age of 3600, a reload may be necessary.
Workaround: May require a reload.
Feature: FCX Layer3 Control Protocols
Reported In Release: FI 07.0.01
Defect ID: DEFECT000279775
Summary: LLDP does not show syslog message under 'show log' command.
Symptom: LLDP syslog message is not seen under system log file.
Feature: FCX L2 Control
Reported In Release: FI 07.0.01
Defect ID: DEFECT000281430
Summary: When a virtual-nei is present on an edge router, ECMP will not be effective for OSPF external
routes.
Symptom: When a virtual-nei is present on an edge router, ECMP will not be effective for OSPF external
routes.
Feature: FCX Layer3 Control Protocols
Reported In Release: FI 07.1.00
Defect ID: DEFECT000286397
Summary: "no global-stp" is lost after a reload. No failover or switch-over.
Symptom: After reloading the FCX unit, the command "no global-stp" is lost.
Workaround: The user will have to reconfigure this command after a reload.
Feature: FCX Management Functionality
Reported In Release: FI 07.1.00
IronWare Software Release 07.2.00a for Brocade FastIron switches
Release Notes v 1.0
Technical Severity:
Function: OSPFV2 - IPV4
Probability: Low
Technical Severity:
Function: LLDP
Probability: Medium
Technical Severity:
Function: OSPFV2 - IPV4
Technical Severity:
Function: CLI and parser
Medium
Medium
Medium
Medium
Page 51 of 55