D-Link DCS-931L User Manual page 12

Section 2 - Installation
Zero Configuration will navigate to the mydlink Live View tab for your camera
where you will see a screen similar to the following.
If you wish to connect your camera to your router wirelessly, you can simply
disconnect the Ethernet cable and move the camera to its intended location; your
router's wireless settings have been automatically transferred to the camera, and
no further configuration is required.
Your camera is now set up. You can skip to the "mydlink" section on page 18
to learn more about the mydlink features of this camera. For "Configuration"
information go to page 19 for advanced configuration of your camera.
D-Link DCS-931L User Manual 12