Scopia Xt Desktop Server - Samsung VC240 Reference Manual

SCOPIA XT Desktop Server

Table 1-17
Table 1-17 Ports supported by SCOPIA Desktop XT Server and Internal Network
Port Range Protocol
80 TCP
443 TCP
3336, 3337 TCP
1025-65535 TCP
(configure
within this
range)
10000-65535 UDP
(configure
within this
range)
Table 1-18
Table 1-18 Ports to and from the SCOPIA Desktop XT Server connected to the public internet
Port Range Protocol
80 TCP
443 TCP
RADVISION | RADVISION Port Security Reference Guide
lists ports that need to be open on SCOPIA XT Desktop Server.
Direction Severity
Incoming Optional
Incoming Mandatory
Outgoing Mandatory
Both Mandatory
Both Recommended Media connection between the SCOPIA Desktop XT Server
lists the ports on the SCOPIA Desktop XT Server when connected to the public internet.
Direction Severity
Incoming Mandatory
Incoming Mandatory
Functionality
GUI—The alternative is to configure the GUI to run on port
443.
Control connection between the
and the
SCOPIA XT Desktop
Cascade/XML control connections between SCOPIA
Desktop Server and SCOPIA XT1000.
H.323 traffic between the
SCOPIA XT1000 Series.
To edit this range:
1.
Navigate to C:\Program Files\Radvision\SCOPIA
Desktop\ConfSrv.
2.
Edit the file config.val.
3.
Locate the
[1 system]
At the bottom of that section, add two lines:
2 portFrom = <lowest range limt>
2 portTo = <highest range limit>
and Client. If not open, the connection will be tunneled
via TCP port 443 and performance will not be optimal.
At full capacity, the SCOPIA XT1009 requires 76 ports.
Limit the range of the of the multimedia ports in the
SCOPIA Desktop XT Server Administrator web interface by
naviagting to Client > Settings tab > Multimedia Ports.
Functionality
GUI access. The alternative is to configure the GUI to run on
port 443.
Control connection between the
SCOPIA Desktop XT Server.
Client
SCOPIA XT Desktop
Server.
SCOPIA Desktop Server and the
section.
and
.
SCOPIA Desktop Client and
| 26