Samsung VC240 Reference Manual page 6

Ports specific to the SCOPIA Elite 5100 Series MCU
Table 1-3
Table 1-3 Ports supported by SCOPIA Elite 5100 Series MCU
Port Range Protocol
12000-13200 RTP/RTCP
16384-16984 (UDP)
(configure
within these
ranges)
Ports Specific to the SCOPIA Elite 5200 Series MCU
Table 1-4
Table 1-4 Ports supported by SCOPIA Elite 5200 Series MCU
Port Range Protocol
22 SSH (TCP)
RADVISION | RADVISION Port Security Reference Guide
lists the ports specific to the SCOPIA Elite 5100 Series MCU.
Functionality Direction Results of
RTP video and Both
audio media
lists the ports supported by the SCOPIA Elite 5200 Series MCU.
Functionality Direction Result of
MCU In
Description
blocking port
on firewall
Cannot Any H.323 or SIP media enabled entity.
transmit/recei
Every call uses two audio ports and six
ve video media
video ports. For highly utilized systems
streams
(above 90%), we recommend multiplying
by a factor of 1.5. Using its full capacity,
the SCOPIA Elite 5100 Series MCU uses 180
ports for audio and 540 ports for video.
To configure the video base port, use the
MCU Advanced Commands section. Enter
the command advcmdmpcsetval with the
parameter mf.BasePort to set the lower
port value.
To configure the audio base port, use the
MCU Advanced Commands section. Enter
the command setmprtpbaseport to set
the lower port value.
Description
Blocking Port
on Firewall
Cannot view SSH Client
logs in real
time (logs are
collected on
the compact
flash card)
| 6