Installing the Product Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product later. • If any items are missing, contact your dealer. •...
Installing the Stand Before attaching the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the screen is facing downwards. Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage, place the monitor down gently and carefully.
Disassembly is in the reverse order of assembly. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. After installation of the base is complete, stand the product up. • Remove the stopper pin. •...
Removing the Stand Before removing the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the screen is facing downwards. Caution: When placing the product on a flat surface, you can damage the projection on the camera. To prevent damage, place the monitor down gently and carefully.
• Samsung shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation engineer.
Connecting with a PC The connecting parts may differ depending on the product model. POWER S/W • Connect the monitor to your PC as illustrated when you intend to use the monitor as a computer display only, and do not intend to use the video call function.
Connecting to the Video Conference Monitor The connecting part may differ depending on the product model. • Connect the monitor to your PC as illustrated when you intend to use the monitor as a computer display and to send and receive video calls or participate in video conferences.
Ferrite Core • • The ferrite cores are used to shield the cables from interference. When connecting a cable, open the ferrite core and clip it around the cable near the plug. Installing the Product...
Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device for more information.
Product Operating Buttons Product Information You can use your monitor as a standard monitor or as a Video Call monitor. The Video Call functions are built into the monitor. Some functions may not operate when using the product as a monitor, since they are designed only for the video call function. ITEM Camera Microphone...
ICON If the OSD is on the screen, use this button to select a function When the OSD is not on the screen, use this button to switch the input signal (PC/DVI/VC). When you switch the input signal by pressing the [ product on, a message displaying the selected input signal appears at the top left of the screen.
Troubleshooting Monitor Self-Diagnosis • You can check if the product is working properly by using the Self-Diagnosis function. • If the monitor displays a blank screen and the Power LED blinks even if the product and the PC are connected, run the Self-Diagnosis function.
• Please check the following solutions before requesting after-sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center or visit the Support page at www.samsung.com. A BLANK SCREEN APPEARS / I CANNOT TURN THE PRODUCT ON Is the power cord connected properly? Is the “Check Signal Cable”...
THE COLOR IS DISPLAYED IN 16 BIT (16 COLORS). THE COLOR HAS BEEN CHANGED AFTER CHANGING THE Did you install the device driver for the product? Is the graphics card configured correctly? WHEN I CONNECT THE MONITOR, THE 'UNKNOWN MONITOR, PLUG&PLAY (VESA DDC) MONITOR FOUND' Did you install the device driver for the product? Check if all the Plug&Play (VESA DDC) functions are sup- ported referring to the User Manual of the graphics card.
How can I change the frequency (refresh rate) of the video signal? How can I change the resolution? How can I use the power saving function? Troubleshooting PLEASE TRY THE FOLLOWING You have to change the frequency of the graphics card. Windows XP : Change the frequency by selecting Control →...