Features; Product Specifications - Ryobi P320 Operator's Manual

PRODUCT SPECIfICATIONS

Motor ..................................................................18 Volt DC
Magazine Capacity ...............................................105 Nails
Nailer Speed .........................................up to 60 shots/min.
KNOW YOUR bRAD NAILER
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the product and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all op-
erating features and safety rules.
AIR PRESSURE DIAL
Adjust internal air pressure to adjust force for more control.
AIRSTRIKE TEChNOLOGY
™
Airstrike Technology provides cordless convenience,
™
eliminating the need for a compressor and bulky air hose
CONSTRUCTION RULER
A construction ruler located along the left side of the maga-
zine allows the operator to make quick measurements while
working.
DEPTh Of DRIvE ADJUSTMENT
The tool-free depth of drive adjustment lets the operator
select precise driving depth of the nail.
CALIfORNIA PROPOSITION 65
WARNING:
This product and some dust created by power sanding, sawing, grinding, drilling, and other
construction activities may contain chemicals, including lead, known to the State of California to cause cancer, birth
defects, or other reproductive harm. Wash hands after handling.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products and,
• arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depending on how often you do this type of work. To reduce your
exposure, work in a well-ventilated area and with approved safety equipment, such as dust masks that are specially
designed to filter out microscopic particles.

fEATURES

Nail Type ...............................................................18 gauge
Brad Nail Length.................................................. 5/8 - 2 in.
DRY-fIRE LOCKOUT
The dry-fire lockout feature keeps the tool from operating
when nails are low in the magazine to prevent missing nails
in the nail pattern and extend tool life.
LED WORKLIGhTS
LED worklights provide light and diagnostic feedback.
LOW NAIL INDICATOR WINDOWS
The open windows in the magazine show how many nails
remain in the tool.
MODE SELECTOR
The mode selector lets the operator choose between Single
Sequential Actuation for precise nail placement and Contact
Actuation for higher productivity
NO-MAR PAD
The no-mar pad prevents marring and denting when using
the tool on softer woods.
WORKPIECE CONTACT
The tool will drive a nail each time the trigger is depressed,
as long as the workpiece contact is depressed.
7 — English