Features; Assembly; Symbols - Ryobi P4003 Operator's Manual

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V Volts
A Amperes
Hz Hertz
W Watt
min Minutes
Direct Current
Alternating Current
.../min Per Minute
Class VI Tool
PRODUCT SPECIFICATIONS
Cable Diameter .................................................... 0.3125 in.
Cable Length ...............................................................50 ft.
Power Source ................. 18 Volt DC/120 V, AC only, 60 Hz
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
NAME
Voltage
Current
Frequency (cycles per second)
Power
Time
Type or a characteristic of current
Type of current
Revolutions, strokes, surface speed, orbits etc., per minute
DOE certification

FEATURES

ASSEMBLY

SYMBOLS

DESIGNATION/EXPLANATION
Minimum Pipe Size (diameter) ................................. 1.25 in.
Maximum Pipe Size (diameter) ..................................... 3 in.
No-Load Speed .................................................60-360/min
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
7 — English