Dynex DX-32L200NA14 User Manual page 16

12
DX-32L200NA14
Using component video (better)
To connect a DVD or Blu-ray player using component
video:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect a component video cable (not provided) to
the VIDEO/Y, P , and P
B
and to the COMPONENT OUT jacks on the
component video device.
Cables are often
color-coded to match
color-coded jacks.
3
Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the side of your TV and to
the L/R AUDIO OUT jacks on the DVD or Blu-ray
player.
Notes
• The VIDEO/Y, P
connect a component device) share the
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
4
Plug your TV's power cord into a power outlet, then
turn on your TV.
5
Turn on the DVD or Blu-ray player, then set it to the
correct output mode. For more information, see the
documentation that came with the player.
6
Press INPUT to open the INPUT SOURCE list.
7
Press or to select COMP/AV, then press ENTER.
jacks on the side of your TV
R
DVD or Blu-ray player
Side of TV
, and P video jacks (used to
B R
Using composite video (good)
To connect a DVD or Blu-ray player using composite
video:
1
Make sure that your TV's power cord is unplugged
and the DVD or Blu-ray player is turned off.
2
Connect an AV cable (not provided) to the VIDEO/Y
jack and AV IN AUDIO L/R jacks on the side of your
TV and to the AV OUT jacks on the DVD or Blu-ray
player.
Note
• The VIDEO/Y, P
connect a component device) share the
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable connects to the green VIDEO/Y jack.
3
Plug your TV's power cord into a power outlet, then
turn on your TV.
4
Turn on the DVD or Blu-ray player, then set it to the
correct output mode. For more information, see the
documentation that came with the player.
5
Press INPUT to open the INPUT SOURCE list.
6
Press or to select COMP/AV, then press ENTER.
Making connections
, and P video jacks (used to
B R
DVD or Blu-ray player
Side of TV