Checking The Digital Signal Strength; Setting Parental Controls; Setting Or Changing The Password - Dynex DX-32L200NA14 User Manual

26
DX-32L200NA14
4
Press or to select the channel you want to label,
then press to move to the channel label field.
5
Press or to select a character, then press
to move to the previous or next position. Repeat this
step to add more characters. You can enter as many
as 11 characters. If you need to delete a character,
enter a blank space, then press ENTER.
6
When you have completed the label, press ENTER.
7
Press MENU to return to the previous menu, or press
EXIT to close the menu.

Checking the digital signal strength

You can check the digital signal strength to determine if
you need to adjust your antenna or digital cable input.
The higher the signal strength, the less likely you are to
experience picture degradation.
To check the digital signal strength:
1
Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press or to highlight Channels, then press
ENTER. The Channels menu opens.
3
Press or to highlight Channel Strength, then
press ENTER. The DTV signal strength is indicated by
the color bar.
4
Press MENU to return to the previous menu, or press
EXIT to close the menu.

Setting parental controls

Parental controls let you prevent your children from
watching inappropriate material on TV. When set,
parental controls read the rating of the program (with
some exceptions, such as news and sports) and deny
access to programs that exceed the ratings level you
select. To watch programs that exceed the selected rating,
you must enter the password.

Setting or changing the password

To set or change the password:
1
or Press MENU. The on-screen menu opens with the
Picture menu displayed.
2
Press
Settings menu opens with Parental Controls
highlighted.
3
Press ENTER. The Enter Password screen opens.
or
4
Press the number buttons to enter the four-digit
password. The default password is 0000. You should
change the password to something you can
remember. The Parental Controls menu opens.
Setting parental controls
or to highlight Settings, then press . The