Dynex DX-32L200NA14 User Manual page 13

Making connections
Using component video (better)
To connect a cable or satellite box using component
video:
1
Make sure that your TV's power cord is unplugged,
and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect a component video cable (not provided) to
the VIDEO/Y, P , and P
B
your TV and the component video out jacks on the
cable or satellite box.
Side of TV
4
Connect an audio cable (not provided) to the
AV IN AUDIO L/R jacks on the side of your TV and to
the audio out jacks on the cable or satellite TV box.
Note
• The VIDEO/Y, P
connect a component device) share the
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
5
Plug your TV's power cord into a power outlet, turn
on your TV, then turn on the cable or satellite box.
6
Press INPUT to open the INPUT SOURCE list.
7
Press or to highlight COMP/AV then press
ENTER.
video jacks on the side of
R
Cable or satellite box
75 Ohm coaxial cable
Component video cable
Cables are often
color-coded to match
color-coded jacks.
, and P video jacks (used to
B R
Using composite video (good)
To connect a cable or satellite box using composite
video:
1
Make sure that your TV's power cord is unplugged,
and all connected equipment is turned off.
2
Connect the incoming cable from the cable wall jack
to the cable-in jack on the cable or satellite box.
3
Connect an AV cable (not provided) to the VIDEO/Y
jack and AV IN AUDIO L/R jacks on the side of your
TV and to the composite video and audio out jacks
on the cable or satellite box.
Note
• The VIDEO/Y, P
connect a component device) share
AV IN AUDIO L/R jacks with the VIDEO/Y jack
(used to connect a composite device).
• When you connect the audio using the
AV IN AUDIO L/R jacks, the audio output is
analog.
Cables are often color-coded to match color-coded jacks.
Note: The yellow video connector on the AV cable connects to the green VIDEO/Y jack.
75 Ohm coaxial cable
4
Plug your TV's power cord into a power outlet, turn
on your TV, then turn on the cable or satellite box.
5
Press INPUT to open the INPUT SOURCE list.
6
Press or to highlight COMP/AV then press
ENTER.
DX-32L200NA14
, and P video jacks (used to
B R
Cable or satellite box
Side of TV
9