The System Setup Menu; Using The System Setup Menu; Manual Speaker Setup - Pioneer X-HM10-K Operating Instructions Manual

08

The System Setup menu

Chapter 8
The System Setup menu

Using the System Setup menu

The following section shows you how to make
detailed settings to specify how you're using
the system, and also explains how to fine-tune
individual speaker system settings to your
liking.
Important
• The OSD will not appear if you have
connected using the HDMI output to your
TV. Use composite connections for system
setup.
SYSTEM
INPUT SELECT
SYSTEM
TV CONTROL
INPUT
1 Switch on the system and your TV.
Use the  SYSTEM button to switch on.
Switch the TV input so that it connects to the
system in analog.
2 Press
then press the SETUP button.
An on-screen display (OSD) appears on your
TV. Use /// and ENTER on the remote
control to navigate through the screens and
select menu items. Press RETURN to confirm
and exit the current menu.
Note
1 • You can't use the System Setup menu when the iPod/USB input is selected.
• Press SETUP at any time to exit the System Setup menu.
72
En
TUNER EDIT
AUDIO
PARAMETER
TOOLS
TOP
SOURCE MENU
ENTER
HOME
MENU
SETUP
RETURN
iPod CTRL
ST/MONO
PTY SEARCH
CH
on the remote control,
1
3 Select the setting you want to adjust.
• Auto MCACC – This is a quick and
effective automatic surround setup (see
Automatically setting up for surround
sound (MCACC) on page 51).
• Manual SP Setup – Specify the number,
distance and overall balance of the
speakers you've connected (see Manual
MASTER
VOLUME
MENU
speaker setup below).

Manual speaker setup

These settings are designed to fine-tune your
system, but if you're satisfied with the settings
made in Automatically setting up for surround
sound (MCACC) on page 51, it isn't necessary
to make all of these settings.
CAUTION
• The test tones used in the System Setup
are output at high volume.
System Setup
1.Auto MCACC
2.Manual SP Setup
Return