Speaker Setup (Htp-710); Safety Precautions When Setting Up; Home Theater Sound Setup; Preparing The Speakers - Pioneer X-HM10-K Operating Instructions Manual

01

Speaker Setup (HTP-710)

Chapter 1-1
Speaker Setup (HTP-710)
Safety precautions when
setting up
When assembling the speakers, lay them down
flat on their side to avoid accidents or injury.
Make sure to use a stable surface when
assembling, setting up, and placing the
speakers.

Home theater sound setup

This is a standard multichannel surround
sound speaker setup for optimal 5.1 channel
home theater sound. The front left and right
speakers should be about 1.8 m to 2.7 m apart.
Front left
Listening position
Surround left
16
En
Front right
Subwoofer
Center
Surround right

Preparing the speakers

1 Attach the non-skid pads to the base of
each speaker stand bases and the receiver
subwoofer.
For speaker stand bases:
Use the supplied adhesive to attach four small
pads to the base (bottom) of each speaker
stand base.
For subwoofer:
Use the supplied adhesive to attach four large
pads to the base of subwoofer.
Small non-skid pads
Large non-skid pads