Copying Tapes; Auto Synchro Editing System) - Pioneer DC-Z94 Operating Instructions Manual

Stereo double cassette deck amplifier; fm/am digital synthesizer tuner; stereo turntable
Hide thumbs Also See for DC-Z94:
Table of Contents

Advertisement

| COPYING TAPES
| A.S.E.S.
| (Auto Synchro Editing System)
If a tape recorded with the DOLBY NR system is copied, the copied
tape will also be recorded automatically with DOLBY NR system.
lf a tape recorded without the DOLBY NR system is copied, the
copied tape will alsa be recorded automatically without the DOLBY
NR system,
1. Load the recorded tape into deck | and the tape for recording into
deck Hl.
* Wind the tape forward past the leader to the start of the magnetic
coating portion.
* Tape copying begins from the forward direction (® }.
* Both sides are copied from deck | to deck f.
* Make sure there is no tape slack.
3. Press one of SYNCHRO COPY | &> Hl button.
NORMAL: for tape copying at normal speed while listening to it.
HIGH: for tape copying at about twice normal speed.
NOTE:
20
<ARB1280>
This function can be used with the Pioneer CD player PO-2Z74T or
PD-Z84M.
For automatic recording of a CD to a cassette tape. This unit offers three
kinds of A.S.E.S. operation.
A.S.E.S. operation
.
|
* The numbers are the CD track numbers
FADE:
©
* The sound tades out automatically at the end of the tape.
side
BNSF
_ 4
3
=
(
Leader tape
Side A|
i+
2
3
FINE:
* Before recording, the CD player calculates which songs and how
many will fiton your selected tape length (COMPU PGM} to minimize
empty end-of-tape space.
Leader tape
DISCO:
Leader tape
{[FADE, DISCO)
1. Put disc in the CD player.
2. Puta tape to be recorded in deck Nl.
3. Set DOLBY NR switch to the desired position.
4. To record the sound passed through the sound image controller,
turn on SOUND CONTROL ON/OFF button and adjust the sound
quality.
5. Press the desired ASES button [FADE (FINE} or DISCO],
if tape remains, you can change CDs and continue recording by using
ASES (FADE, DISCO only}.
Perform 1-5, ASES will finish temporarily.
6. Change CD.
7. Press PAUSE button.
* The Direction Indicator part of the display will flash in the direction
of tape travel and recording will begin in that direction.

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-z94Pl-z94

Table of Contents