Density Adjustment - Brother HL-S7000DN User Manual

Driver and Software
Sleep Time
When the machine does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the machine acts as though it were turned off. When you choose Printer Default, the timeout setting will be
reset to the specific time set at the machine; this can be altered in the driver. Intelligent Sleep Mode
automatically adjusts to the most suitable timeout setting depending on the frequency of your machine use.
While the machine is in Sleep Mode, the LCD shows Sleep, but the machine can still receive data. Receiving
a print job will automatically wake up the machine to start printing.
Macro
You can save a page of a document as a macro to the machine's memory. You can also execute the saved
macro (you can use the saved macro as an overlay on any document). This will save time and increase print
speed for often used information such as forms, company logos, letterhead formats or invoices.

Density Adjustment

Increases or decreases the print density.
You cannot change the Density Adjustment setting if you check Slow Drying Paper on the Basic tab.
When you choose Duplex or Booklet and increase print density, print speed will decrease accordingly.
TrueType Mode
TrueType fonts may be sent to your printer in one of the following ways:
 Download as TrueType
 Download as Bit image
2
2
2
2
2
38