Brother HL-S7000DN User Manual page 86

General Information
Paper Tray (continued)
Submenu
1
Tray3 Size
1
Tray4 Size
The factory settings are shown in Bold with an asterisk.
1
When optional lower trays are installed.
2
When the optional output tray is installed.
General Setup
Submenu
Local Language
Density
Ecology
Beeper
Panel Control
Stopper LED
The factory settings are shown in Bold with an asterisk.
Options
Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio
Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio
Menu Selections Options
- English* / Français...
- -6 / ... / -1 / 0* / 1 / ... / 6
0 / 1 / 2 / 3* / 4 / 5 / ... Min
Sleep Time
On / Off*
Ink Save
- Low / Med / High / Off*
0.1Sec* / 0.4Sec /
Button Repeat
0.6Sec / 0.8Sec /
1.0Sec / 1.4Sec /
1.8Sec / 2.0Sec
Level1* / Level2 / ... /
Message Scroll
Level10
-nnonn+
LCD Contrast
On* / Off
Auto Online
- On* / Off
Descriptions
Chooses the size of paper you loaded in this optional
lower tray.
Chooses the size of paper you loaded in this optional
lower tray.
Descriptions
Changes the LCD language for your
country.
Increases or Decreases the print
density.
Increasing the print density will darken
the printed image. When you choose
Duplex or Booklet and increase print
density, print speed will decrease
accordingly.
Sets the time to return to Power Save
mode.
Increases the page yield of the ink
cartridge.
Adjusts the beeper volume.
Sets the time for the LCD message to
change when holding a or b at intervals.
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
Adjusts the contrast of the LCD.
Sets the machine to automatically
return to Ready mode.
Chooses whether the output paper
stopper lights according to the machine
status. This item is available when the
stopper is set at its default Letter/A4
position.
3
80