Brother HL-S7000DN User Manual page 85

General Information
Paper Tray
Submenu
Tray Use
Manual Feed
Priority
1
Separator Tray
MP First
Duplex
2
Output Tray
MP Size
Tray1 Size
1
Tray2 Size
The factory settings are shown in Bold with an asterisk.
Options
Auto* / MP Only / Tray1 Only /
1
/ Tray3 Only
Tray2 Only
1
Tray4 Only
On / Off*
(When no optional lower trays are
installed)
MP>T1* / T1>MP
(When Tray 2 is installed)
MP>T1>T2* / MP>T2>T1 /
T1>T2>MP / T2>T1>MP / MP>T1 /
T1>MP
(When Tray 2 and Tray 3 are
installed)
MP>T1>T2>T3* / MP>T3>T2>T1 /
T1>T2>T3>MP / T3>T2>T1>MP /
MP>T1>T2 / MP>T2>T1 /
T1>T2>MP / T2>T1>MP
(When Tray 2, Tray 3 and Tray 4 are
installed)
MP>T1>T2>T3>T4* /
MP>T4>T3>T2>T1 /
T1>T2>T3>T4>MP /
T4>T3>T2>T1>MP /
MP>T1>T2>T3 / MP>T3>T2>T1 /
T1>T2>T3>MP / T3>T2>T1>MP
Off* / Tray 2 / Tray 3 / Tray 4
On / Off*
On(Long Bind) /
On(Short Bind) / Off*
Auto* / Standard / Optional
Any* / Letter / Legal / A4 /
Executive / JIS B5 / B5 / A5 /
A5 L / JIS B6 / A6 / Folio / 3X5 /
User Defined
Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / A5 L /
Folio
Any* / Letter / Legal / A4 /
Executive / JIS B5 / A5 / Folio
Descriptions
Chooses the tray that will be used.
1
/
Chooses whether to feed paper manually.
When Auto is chosen in Tray Use: Chooses the
order in which the machine uses the paper trays that
contain paper of the same size.
Chooses the tray that contains the paper used as the
separator paper, which will be inserted between
each print job.
Chooses whether to feed paper from the MP tray as
a priority.
Chooses whether to automatically print on both sides
of the paper.
Chooses the destination output paper tray.
Chooses the size of paper you put in the MP tray.
Chooses the size of paper you loaded in the
standard paper tray.
Chooses the size of paper you loaded in this optional
lower tray.
3
79