Plc Settings - D-Link DHP-W311AV User Manual

Section 3 - Configuration
This section will show you how to configure your new D-Link Powerline AV using the web-based configuration utility.
Power Saving:
Power save mode.
Network
You can set the name of your network and to make
Name:
it either public or private. Make sure the Network
Name of all of the devices within your Powerline
network is the same.
Public
Select this option if you would like to make
Network
your Powerline network public with the default
Name:
Network Name of "HomePlugAV". Since this is a
commonly used Network Name, it is less secure
than a private Network Name.
Private
Select this option if you wish to make your
Network Powerline network more secure by using a private
Name: Network Name.
Scan: Click this button to scan for new Powerline devices.
This is automatically done periodically and upon
loading this page.
Member List: This section provides information on the Powerline
AV devices on your Powerline network.
QoS Setting: Here you can set the Quality of Service (QoS)
settings for each network device. QoS helps you
prioritize network traffic based on device or the
port the traffic is on.
MAC Address/ Select a device from the Computer Name dropdown box and then click the << above Computer Name to automatically fill in
Port Number: the device's MAC Address. Or, Set the priority for the device under the Priority dropdown box. Clear settings for a rule with the
Clear button. Remember to click Save Settings after making changes.
D-Link DHP-W311AV User Manual

PLC Settings

21