Table of Contents
Advertisement
PITCH ADJUSTMENTS
3. PITCH BEND BUTTONS (15):
The (+) PITCH BEND BUTTON (15) will increase track playback speed and the (-) PITCH BEND BUTTON (15)
will decrease track playback speed. The extent to which the speed changes is proportionate to the amount
of time the button is pressed. For example, if the (+) PITCH BEND BUTTON (15) is held down continuously as
in figure 43, the disc speed will increases and will continue to increase until it reaches a maximum of 100%
speed gain. When you release the (+) PITCH BEND BUTTON (15) the disc speed will automati
it's previous set speed.
4. JOG WHEEL (1):
The JOG WHEEL will temporarily bend the pitch if a track is in playback mode Rotating the wheel in a clock-
wise direction will increase your track pitch and rotating the wheel in a counter-clockwise direction will slow
your track pitch. The speed you rotate the JOG WHEEL will determine pitch bend percentage (%). For example,
if the JOG WHEEL is continuously turned in a counter-clockwise direction the playback speed will steadily
decreases and will continue to decrease until playback reaches a maximum of -100% and playback stops
entirely. When you stop turning the JOG WHEEL the disc speed will automati
speed.
NOTE: You cannot use the JOG WHEEL as a pitch bend function when the SCRATCH EFFECT (5) is
activated.
T IME
Figure 35
American Audio
- www.americanaudio.us - MCD-810™ Instruction Manual Page 25
©
®
CUE
CD
MP3
TRACK
AUTO CUE
FOLDER
TOTALREMAIN
SINGLE
RELOOP
M
S
S G L
C TN
M
1
2
3
B O P
ally return to
c
AUTO BPM
PITCH
F
TIME
4
T A P
ally return to
c
it's previous set
CUE
CD
MP3
TRACK
AUTO CUE
FOLDER
TOTALREM
SINGLE
RELOOP
S G L
C T N
M
1
2
Advertisement
Table of Contents
