Adjusting Density - Kyocera TASKalfa 620 Operation Manual

Adjusting Density

Adjust the density automatically or manually. [Manual] is selected as the default setting mode. When
selecting [Manual], follow the steps as below.
1
Place the originals in the document processor or on the platen.
2 Press the density adjustment key
(
To use the automatic density mode,
press [Auto density]. The copier
determines a suitable density level for
copying.
To change the density mode from [Auto]
to [Manual], press the density
adjustment key (
3 Press the Start key to start copying.
NOTE: By pressing [Density], the Density Mode
screen will be displayed. You can also adjust the
density from this screen.
You can increase or decrease the density of the auto
density mode. Refer to Chapter 3 of the Advanced
Operation Guide.
You can fix the default setting mode in the auto
density mode. Refer to Chapter 3 of the Advanced
Operation Guide.
You can choose the adjustment level from 7 or 13.
Refer to Chapter 3 of the Advanced Operation Guide.
/ ) to adjust the density level.
/ ).
Ready to copy.
11x 8½"
Plain
11x 8½"
APS Auto %
Recycled
11x 17" MP tray
100％
Plain
Plain
8½x11" 11x8½"
Zoom
Plain Plain
User choice Function
Basic
Basic Operation
Paper Size
1
100%
Off
Auto Staple
Density Left Top
Density Staple
/Punch
Program
3-5