Table of Contents
Advertisement
1. power distribution board
2. screws (6)
Installing The Power Distribution Board
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
1.
Align the screw holes on the power distribution board (PDB) with the holes in the chassis.
2.
Secure the PDB on to the chassis using the six screws.
3.
If applicable, install the power interposer board.
4.
Connect the power cables to the system board and the hard-drive backplane.
5.
Install the power supply module(s) in their original locations.
6.
Close the system.
7.
If applicable, place the system upright on a flat, stable surface and rotate the system feet outward.
8.
Reconnect the system to its electrical outlet and turn the system on, including any attached peripherals.
Installing The Power Interposer Board
CAUTION: Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your
warranty. Read and follow the safety instructions that came with the product.
94
Advertisement
Table of Contents
Troubleshooting
