Dell External M620 t Owner's Manual page 132

Error Code Message Information
Details
Action
VLT0200
Message
LCD Message
Details
Action
VLT0201
Message
LCD Message
Details
Action
VLT0202
Message
LCD Message
132
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see
name > voltage is less than the lower critical
The system board <
threshold.
System board voltage is outside of range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see
name > voltage is less than the lower warning
The system board <
threshold.
System board voltage is outside of range.
System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see
name > voltage is greater than the upper warning
The system board <
threshold.
System board voltage is outside of range.
Getting Help.
Getting Help.
Getting Help.