Dell External M620 t Owner's Manual page 112

Error Code Message Information
PSU0004
Message
LCD Message
Details
Action
PSU0005
Message
Details
Action
PSU0006
Message
LCD Message
Details
Action
PSU0007
Message
Details
Action
PSU0008
Message
Details
Action
PSU0016
Message
112
The power input for power supply <
allowable range.
number > is outside of range. Check PSU
Power input for PSU <
cables.
The operating requirements for the power supply may be found in this
manual or on the power supply itself.
Verify the input source is attached to the power supply. Verify the
input power is within the operating requirements for the power
supply.
The power input for power supply <
allowable range, but it is attached to the system.
The operating requirements for the power supply may be found in this
manual or on the power supply itself.
Verify the input power is within the operating requirements for the
power supply.
number > type mismatch.
Power supply <
number > is incorrectly configured. Check PSU.
Power supply <
Power supplies should be of the same input type and power rating.
Install matched power supplies and review proper configuration in
this manual.
number > is operating at 110 volts, and could cause a
Power supply <
circuit breaker fault.
A power supply that is designed to operate at 220V, but is connected
to a 110V power source requires additional current for operation. The
additional current may trip circuit-breakers or cause other electrical
issues with the input source.
Check input power source and cabling. Use recommended input
power. Review this Manual. If the issue persists, see
number > voltage rating does not match the system's
Power supply <
requirements.
The system does not support mixed voltage power supplies.
Install a power supply with the correct voltage rating.
number > is absent.
Power supply <
number > is outside of the
number > is outside of the
Getting Help.