Buttons And Other Controls On The Screen - Alpine INE-W940 User Manual

6. If needed, modify the default route planning options. Later you can change them in Route settings
(page 70).
7. The initial setup is now complete. The Configuration wizard can be restarted later from the Settings
menu (page 67).
After the initial setup, the Map screen appears and you can start using the software.

2.1 Buttons and other controls on the screen

When you are using the software, you usually tap buttons on the touch screen.
You only need to confirm selections or changes if the application needs to restart, it needs to perform a
major reconfiguration, or you are about to lose some of your data or settings. Otherwise, the software
saves your selections and applies the new settings without confirmation as soon as you use the controls.
Type Example
Button
Button
with value
Icon
Description
Tap it to initiate a function, to
open a new screen, or to set a
parameter.
Some buttons display the
current value of a field or setting.
Tap the button to change the
value. After the change, the new
value is shown on the button.
Shows status information.
8
How to use it
Tap it once.
Tap it once.
Some icons also function as a
button. Tap them once.